{"title":"Ballast Pumps","description":"\u003cp\u003eShop Ballast Pumps for marine maintenance, repair, replacement, and upgrade projects. Compare available products by hose or fitting size, material, flow or pressure requirements, voltage, and application so you can narrow the options for your boat, engine, trailer, or onboard system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow to choose:\u003c\/strong\u003e Confirm the manufacturer part number and application details before ordering, then review the product specifications for exact fit and installation requirements. For compatibility questions, contact Marine Parts Only with your equipment details and the part number you are replacing.\u003c\/p\u003e","products":[{"product_id":"jabsco-ballast-king-bronze-dc-pump-with-deutsch-connector-15-gpm-wakeboard-and-ski-boat-ballast-pump","title":"Jabsco Ballast King Bronze DC Pump with Deutsch Connector – 15 GPM Wakeboard and Ski Boat Ballast Pump","description":"\u003cp\u003e\u003cstrong\u003eBallast King Bronze DC Pump with Deutsch Connector - No Reversing Switch - 15 GPM\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWakeboard and Ski Boat Ballast Pump\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlow rate: 15 US gallons\/min (57 Litres\/min)\u003c\/li\u003e\n\u003cli\u003eSelf-priming from dry up to 1.2m (4ft)\u003c\/li\u003e\n\u003cli\u003eAdds approx 125lbs (56kgs) of ballast per minute\u003c\/li\u003e\n\u003cli\u003eReversible to both fill and empty tanks\u003c\/li\u003e\n\u003cli\u003eSimple design means fewer wearing parts\u003c\/li\u003e\n\u003cli\u003eISO 8846 MARINE (Ignition protection)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Ballast King is designed to pump water into Wakeboard Liquid Ballast Tanks and when reversed will also pump water out of them. It has a flow rate of 15 gallons per minute, so it can fill most ballast tanks in about five minutes. It is equipped with a Run-Dry Protection Device (patent pending) to automatically shut-off the pump and protect the impeller from run-dry damage should the pump be mistakenly left on after the Ballast Tank is empty.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBody Materials: Bronze\u003c\/li\u003e\n\u003cli\u003eImpeller: Jabsco Neoprene compound\u003c\/li\u003e\n\u003cli\u003eSeal: Lip Type\u003c\/li\u003e\n\u003cli\u003ePort(s): 1\/2\" Internal Pipe Threads 1\" External Hose Barb\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 (Vdc)\u003c\/li\u003e\n\u003cli\u003eAmp Draw: 19 (amp)\u003c\/li\u003e\n\u003cli\u003eFuse Size: 25 (amp)\u003c\/li\u003e\n\u003cli\u003eMotor Type: Equipped with Run-Dry Protection Device (Patent Pending) Permanent Magnet Type Fully Enclosed Stainless Steel Shaft Ball Type Shaft Bearing Reversible\u003c\/li\u003e\n\u003cli\u003eDuty Cycle: 30 Minutes Max\u003c\/li\u003e\n\u003cli\u003eDimensions: 3 5\/8 x 8 x 4 3\/4 (inches)\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e\n\u003cp\u003eThe Jabsco Ballast King Bronze DC Pump is engineered for seamless water management in wakeboard and ski boats, offering reliable performance to fill and empty ballast tanks efficiently. Crafted with a durable bronze body, this pump is built to withstand the demanding marine environment while maintaining optimal flow rates. Its self-priming capability allows it to operate from dry conditions up to 4 feet, ensuring quick and consistent ballast adjustments for a superior on-water experience. With a flow rate of approximately 15 gallons per minute, the Ballast King can fill most ballast tanks in about five minutes, saving valuable time and effort during setup or breakdown.\u003c\/p\u003e\u003cp\u003eDesigned for versatility, this reversible pump enables users to both fill and drain ballast tanks with ease, making it an essential component for customizing boat weight distribution. Its simple yet robust design features fewer wearing parts, ensuring longevity and reducing maintenance needs. The pump is equipped with an ISO 8846 MARINE ignition protection rating, providing added safety and reliability in marine environments. Additionally, the Run-Dry Protection Device (patent pending) automatically shuts off the pump if it detects dry operation, shielding the impeller from damage and extending the lifespan of the unit.\u003c\/p\u003e\u003cp\u003eThe Jabsco Ballast King is compatible with 1\/2\" internal pipe threads and 1\" external hose barb fittings, making installation straightforward. It operates on 12 volts DC with a 19-amp draw and a 25-amp fuse size, suitable for most boat electrical systems. Its fully enclosed stainless steel shaft and neoprene impeller guarantee durability and consistent performance. Whether filling or draining, this pump offers a duty cycle of up to 30 minutes, ideal for boat ballast management. Compact and efficient, the Jabsco Ballast King Bronze DC Pump is the perfect upgrade for wakeboarders and water sports enthusiasts seeking reliable, high-performance ballast control.\u003c\/p\u003e\u003cp\u003eCertified for marine use and built for longevity, this pump ensures your watercraft maintains optimal weight distribution for improved handling and performance, all while providing the convenience of quick, automated ballast adjustments. Note: This product does not include a reversing switch but offers reversible functionality for versatile operation.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFlow rate: 15 gallons per minute (57 liters per minute) for quick ballast filling and emptying\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSelf-priming from dry up to 4 feet to ensure reliable operation in various conditions\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eReversible design allows for both filling and draining ballast tanks\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConstructed with a durable bronze body to withstand marine environments\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eEquipped with Run-Dry Protection Device to prevent impeller damage during dry operation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eISO 8846 MARINE ignition protection for safety and reliability\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompatible with 1\/2\" internal pipe threads and 1\" external hose barb fittings for easy installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOperates on 12V DC with a 19-amp draw and 25-amp fuse for compatibility with marine electrical systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompact dimensions and lightweight design for easy mounting and integration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSuitable for duty cycle up to 30 minutes, ideal for ballast management in wakeboard and ski boats\u003c\/li\u003e\u003c\/ul\u003e\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eTruck Freight: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOversized: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":44253784866905,"sku":"86989","price":415.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/86989XL.jpg?v=1785357969"},{"product_id":"jabsco-wakeboard-ballast-puppy-replacement-pump-with-deutsch-connector-fast-filling-ignition-protected","title":"Jabsco Wakeboard Ballast Puppy Replacement Pump with Deutsch Connector - Fast Filling, Ignition Protected","description":"\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eWakeboard Ballast Puppy with Deutsch Connector - Replacement Pump Only - No Switch\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eChoose the Jabsco Ballast Puppy w\/Deutsch Connector if you are replacing a Jabsco Ballast Puppy pump already installed in the boat. If installing a new automated system, your best option is the Jabsco Wakeboard Ballast Puppy Reversible Pump that is equipped with the pre-wired switch connector (18220-1127).\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eF\u003c\/strong\u003e\u003cstrong\u003eeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFills an 800-pound bag in approximately 9 minutes and 5 seconds\u003c\/li\u003e\n\u003cli\u003ePower source: Plug-and-Wake Connector\u003c\/li\u003e\n\u003cli\u003eType: Component reversible pump for automated ballast system\u003c\/li\u003e\n\u003cli\u003eIgnition Protected: Protects against ignition of fuel vapors or other combustibles.\u003c\/li\u003e\n\u003cli\u003eThermal Damage Protection: The integrated Thermal Damage Protection circuit monitors the temperature of the pump motor and automatically shuts it off if conditions indicate water is no longer flowing through the pump. This innovative feature will prevent damage to the motor from overheating.\u003c\/li\u003e\n\u003cli\u003eIgnition Protected: Designed for safe installation in the bilge compartment of the boat without risk of fire or explosion due to fuel vapors. This feature alone is crucial for safe operation and is one important distinguishing factor between the Ballast Puppy and the similar pump to which it is often compared.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp id=\"isPasted\"\u003e*NOTE: Directly compatible with 2013 and newer Mastercraft boats. 2002-2012 MasterCraft boats will also need the WakeMAKERS Deutsch DTP to DT Wiring Adapter (see recommended accessories) for full compatibility.\u003c\/p\u003e\u003cp\u003eThe Jabsco Ballast Puppy Reversible Ballast Pump is reliable, fast, and efficient. That is why it is the most popular ballast pump in wakeboarding. This is the pump that is used by Centurion, Mastercraft, Moomba, Nautique, and Supra boats to power their automated ballast systems, and the direct replacement for model 18670-6127.\u003c\/p\u003e\u003cp\u003eReversible pumps simplify the design and reduce the number of components required for installation. Whether replacing a pump or installing a fully automated ballast system, this is one of the most popular ballast pumps on the market. This is the newest model of the Puppy pump and is a direct replacement for all previous models.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eVersatile, High Volume Connection Options\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe unique design of the pump head features integrated hose barbs for use with 1 hose. Just slide the hose over the bronze inlet and outlet ports and secure with hose clamps.\u003c\/p\u003e\u003cp\u003eAdditionally, 1\/2 NPT female connections are provided for use with a smaller hose (use with optional 1\/2 thread to 3\/4 hose barb adapter to convert to 3\/4 hose if necessary), giving you a multitude of connection options.\u003c\/p\u003e\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFill Rate: This pump fills and drains at a rate of 88 pounds\/min\u003c\/li\u003e\n\u003cli\u003eFlow Rate: 640 Gallons Per Hour \/ 10.6 Gallons Per Minute\u003c\/li\u003e\n\u003cli\u003ePhysical Dimensions: 3-5\/8 H x 4-3\/4 W x 7-1\/8 L\u003c\/li\u003e\n\u003cli\u003eInlet\/Outlet: 1 Hose Barb and 1\/2 NPT Internal Thread\u003c\/li\u003e\n\u003cli\u003eSelf-priming: Yes\u003c\/li\u003e\n\u003cli\u003eSafety Features: Ignition Protected\u003c\/li\u003e\n\u003cli\u003eImpeller Color: Green\u003c\/li\u003e\n\u003cli\u003e1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e\n\u003cp\u003eThe Jabsco Wakeboard Ballast Puppy w\/Deutsch Connector is a reliable and efficient replacement pump designed for wakeboarding boats. Engineered to quickly fill an 800-pound ballast bag in just over nine minutes, this pump ensures your boat is ready for action in minimal time. Its plug-and-wake connector makes installation straightforward, whether you're replacing an existing pump or setting up a new automated ballast system. Crafted for durability and safety, the pump features ignition protection, preventing fire risks in the bilge area, and thermal damage protection, which automatically shuts off the motor if it overheats, extending the lifespan of the pump.\u003c\/p\u003e\u003cp\u003eThe versatile design includes integrated hose barbs for easy connection with 1-inch hoses, secured with hose clamps, and 1\/2 NPT female connections to accommodate smaller hoses with optional adapters. This flexibility allows seamless integration into various boat configurations, including models from 2002 and newer MasterCraft boats, with additional wiring adapters for older models. The pump boasts a flow rate of 640 gallons per hour and a fill rate of 88 pounds per minute, making it one of the fastest options available for wakeboarding ballast systems.\u003c\/p\u003e\u003cp\u003eBuilt with a self-priming feature, the Jabsco Ballast Puppy ensures hassle-free operation, reducing maintenance and installation time. Its compact dimensions make it easy to install in tight spaces, and the green impeller signifies its high-quality construction. This model is a direct replacement for the popular model 18670-6127, trusted by major brands like Centurion, Nautique, Moomba, and Supra. Backed by a one-year warranty, the pump offers peace of mind for boat owners seeking a dependable solution to enhance their wakeboarding experience. As a Prop 65 compliant product, safety and durability are prioritized, making this pump an ideal choice for recreational and professional wakeboarders alike.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFills an 800-pound ballast bag in approximately 9 minutes and 5 seconds\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003ePower source: Plug-and-Wake connector for quick installation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eType: Component reversible pump suitable for automated ballast systems\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIgnition Protected: Ensures safe operation in the boat's bilge area\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eThermal Damage Protection: Monitors motor temperature and prevents overheating\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eVersatile connection options with integrated hose barbs and 1\/2 NPT threaded fittings\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSelf-priming design for reliable startup\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eFlow Rate: 640 gallons per hour or 10.6 gallons per minute\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eCompact dimensions for easy installation in tight spaces\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eDurable construction with a green impeller and one-year warranty\u003c\/li\u003e\u003c\/ul\u003e\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eTruck Freight: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOversized: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"Jabsco","offers":[{"title":"Default Title","offer_id":44253790208089,"sku":"112964","price":307.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/112964XL.jpg?v=1785358046"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/collections\/86989XL.jpg?v=1785873527","url":"https:\/\/www.marinepartsonly.com\/collections\/ballast-pumps.oembed","provider":"Marine Parts Only","version":"1.0","type":"link"}