{"title":"Motor and Fuel System","description":"","products":[{"product_id":"trident-marine-3-8-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-sold-by-the-foot","title":"Trident Marine 3\/8\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the Foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.588 \/ (mm) 14.9\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 4\" \/ (mm) 101.6\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 10.5 \/ (kg\/m) 0.156\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612197916761,"sku":"99615","price":5.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-38-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-sold-by-the-foot-6970360.jpg?v=1761808556"},{"product_id":"trident-marine-3-8-x-50-39-boxed-low-permeation-type-a1-15-fuel-line-hose-black","title":"Trident Marine 3\/8\" x 50\u0026#39; Boxed Low Permeation Type A1-15 Fuel Line Hose - Black","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.681 \/ (mm) 17.3\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 15.6 \/ (kg\/m) 0.233\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612224229465,"sku":"98796","price":155.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-38-x-5039-boxed-low-permeation-type-a1-15-fuel-line-hose-black-5167677.jpg?v=1761808165"},{"product_id":"trident-marine-5-8-x-50-39-boxed-type-a2-fuel-amp-vent-line-hose-black","title":"Trident Marine 5\/8\" x 50\u0026#39; Boxed Type A2 Fuel \u0026amp; Vent Line Hose - Black","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" x 50' Boxed Type A2 Fuel \u0026amp; Vent Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/8\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960 \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 25.84 \/ (kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612237828185,"sku":"98798","price":191.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-58-x-5039-boxed-type-a2-fuel-amp-vent-line-hose-black-4357160.jpg?v=1761807937"},{"product_id":"attwood-universal-sprayless-connector-ndash-hose-male-5-16-3-8","title":"Attwood Universal Sprayless Connector \u0026ndash; Hose Male (5\/16\"-3\/8\")","description":"\u003cp\u003e\u003cstrong\u003eUniversal Sprayless Connector – Hose Male (5\/16\"-3\/8\")\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Universal Sprayless Connector reliably eliminates fuel spraying when you are connecting and disconnecting fuel hoses during fueling or maintenance. Also, this connector replaces a traditional fitting and its high-strength body is engineered to withstand the rigors of a marine environment. The Universal Sprayless Connector – Hose Male, is a female hose fitting compatible with 5\/16-In. and 3\/8-In. fuel lines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMale hose fitting compatible with 3\/8\" and 5\/16\" fuel lines\u003c\/li\u003e\n\u003cli\u003eIncludes check valves that automatically close upon disconnecting\u003c\/li\u003e\n\u003cli\u003eHigh fuel flow fitting (less than .25kPa restriction at 50 liters\/hour)\u003c\/li\u003e\n\u003cli\u003eIt meets EPA and CARB requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*This connector is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42612266041433,"sku":"98201","price":19.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-universal-sprayless-connector-ndash-hose-male-516-38-1396184.jpg?v=1761807647"},{"product_id":"attwood-universal-sprayless-connector-hose-female-5-16-3-8","title":"Attwood Universal Sprayless Connector - Hose Female (5\/16\"-3\/8\")","description":"\u003cp\u003e\u003cstrong\u003eUniversal Sprayless Connector - Hose Female (5\/16\"-3\/8\")\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Universal Sprayless Connector reliably eliminates fuel spraying when you are connecting and disconnecting fuel hoses during fueling or maintenance. This connector replaces a traditional fitting and its high-strength body is engineered to withstand the rigors of a marine environment. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFemale hose fitting compatible with 3\/8\" and 5\/16\" fuel lines\u003c\/li\u003e\n\u003cli\u003eIncludes check valves that automatically close upon disconnecting\u003c\/li\u003e\n\u003cli\u003eHigh fuel flow fitting (less than .25kPa restriction at 50 liters\/hour)\u003c\/li\u003e\n\u003cli\u003eReliably eliminates fuel spraying when connecting and disconnecting the fuel hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Compatible with Ethanol blended fuels and all OEM-brand engines\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42612266565721,"sku":"98199","price":13.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-universal-sprayless-connector-hose-female-516-38-6985114.jpg?v=1761807566"},{"product_id":"trident-marine-1-1-2-type-a2-fuel-fill-hose-sold-by-the-foot","title":"Trident Marine 1-1\/2\" Type A2 Fuel Fill Hose - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003eTrident Marine 1-1\/2\" Type A2 Fuel Fill Hose - Sold by the Foot\u003c\/strong\u003e is organized for fuel system parts shoppers who need a clear, professional marine parts buying experience.\u003c\/p\u003e\u003cp\u003e1-1\/2\" Type A2 Fuel Fill Hose - Sold by the Foot Trident 1-1\/2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features: Sold by the foot This hose is built with the best fuel, fire, and age-resistant formulation Provides extraordinary resistance to aging, fire, heat, cold, and the ozone Also, provides excellent bend-ability Applications: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube \u0026amp; Cover: NBR \/ Neoprene Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to\u003c\/p\u003e\u003ch3\u003eFitment \u0026amp; Product Details\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBrand \/ Manufacturer: Trident Marine\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eSearch-optimized by brand, system, part type, and fitment cues.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your original part number, engine model, and application before ordering.\u003c\/li\u003e\n\u003cli\u003eBuilt for boat owners, e-commerce shoppers, and professional marine service teams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612286390361,"sku":"99617","price":17.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-1-12-type-a2-fuel-fill-hose-sold-by-the-foot-6685124.jpg?v=1761807449"},{"product_id":"regitar-usa-fuel-pump-assembly-f-mercury-amp-mercruiser-engines-w-high-pressure-pump","title":"Regitar USA Fuel Pump Assembly f\/Mercury \u0026amp; Mercruiser Engines w\/High-Pressure Pump","description":"\u003cp\u003e\u003cstrong\u003eFuel Pump Assembly for Mercury \u0026amp; Mercruiser Engines with High-Pressure Pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFuel Pump Assembly for Mercury and Mercruiser engines: Fits with MCM\/MIE 4.3L\/V6 and 5.0L\/V8 Gen+ and some 350 ci carburetors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Brand:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMercruiser\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1998 MERCURY MARINE Fuel Pump 4.3L 262\u003c\/li\u003e\n\u003cli\u003e2000 MERCURY MARINE Fuel Pump 5.0L 305\u003c\/li\u003e\n\u003cli\u003e2000 MERCURY MARINE Fuel Pump 5.7L 350\u003c\/li\u003e\n\u003cli\u003eFits with MCM\/MIE 4.3L\/V6 and 5.0L\/V8 Gen+ and some 350 ci carburetors\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Regitar U.S.A.","offers":[{"title":"Default Title","offer_id":42612578943065,"sku":"107713","price":127.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/regitar-usa-fuel-pump-assembly-fmercury-amp-mercruiser-engines-whigh-pressure-pump-5230449.jpg?v=1761804595"},{"product_id":"trident-marine-4-39-black-stern-flex-hose-w-transom-flange","title":"Trident Marine 4\u0026#39; Black Stern Flex Hose w\/Transom Flange","description":"\u003cp\u003e\u003cstrong\u003e4' Black Stern Flex Hose with Transom Flange\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Trident Stern Flex Hose is black (Trident Marine 129 series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142-2000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHighly resistant to crushing, abrasion, and UV and has excellent resistance to chemicals \u003c\/li\u003e\n\u003cli\u003eExtraordinary flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHose: Lightweight polyethylene copolymer\u003c\/li\u003e\n\u003cli\u003eReinforcement: Integral Polyethylene Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40°F to 140°F (-40ºC to 60ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInner Diameter: (inch) 2” \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.35” \/ (mm) 60\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3.5” \/ (mm) 88.9\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 26 \/ (kg\/m) 11.8\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612586184793,"sku":"99759","price":37.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-439-black-stern-flex-hose-wtransom-flange-1242777.jpg?v=1761804519"},{"product_id":"attwood-fuel-tank-strap-set-48-long-f-3-6-gallon-tanks","title":"Attwood Fuel Tank Strap Set - 48\" Long f\/3-6 Gallon Tanks","description":"\u003cp\u003e\u003cstrong\u003eFuel Tank Strap Set - 48 (inches) Long for 3-6 Gallon Tanks\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Tank Strap Set contains everything needed to secure a 3-6-gallon fuel tank in place. This kit includes a 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle. There are also 2 metal footman securing loops and the screws needed to install them. The strap can be run through the footman openings and then tightened and buckled to hold the tank in place.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 48-inch-long, 1-inch-wide white nylon web strap with a zinc-plated carbon steel snap and quick-release buckle\u003c\/li\u003e\n\u003cli\u003eRun the strap through footman loops, then tighten and buckle to hold the tank in place\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42612603519065,"sku":"98358","price":13.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-fuel-tank-strap-set-48-long-f3-6-gallon-tanks-1784600.jpg?v=1761804173"},{"product_id":"attwood-outboard-fuel-filter-f-3-8-lines","title":"Attwood Outboard Fuel Filter f\/3\/8\" Lines","description":"\u003cp\u003e\u003cstrong\u003eOutboard Fuel Filter for 3\/8 inch Lines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eProtect your carbureted engine by trapping pollutants before they even reach the engine itself. High-flow, in-line fuel filters will work with most outboard motors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse with 3\/8 inch fuel lines\u003c\/li\u003e\n\u003cli\u003eWorks with most outboard motors\u003c\/li\u003e\n\u003cli\u003eA clear body allows visual inspection, making it easier to stay on top of maintenance\u003c\/li\u003e\n\u003cli\u003eHigh-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions\u003c\/li\u003e\n\u003cli\u003eDisposable for ultimate convenience\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Best to replace during winterize or spring start-up for optimum results\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42612605157465,"sku":"98364","price":4.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-outboard-fuel-filter-f38-lines-2993585.jpg?v=1761804166"},{"product_id":"attwood-universal-brass-fuel-hose-fitting-1-4-npt-x-3-8-barb","title":"Attwood Universal Brass Fuel Hose Fitting - 1\/4\" NPT x 3\/8\" Barb","description":"\u003cp\u003e\u003cstrong\u003eUniversal Brass Fuel Hose Fitting - 1\/4\" NPT x 3\/8\" Barb \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels\u003c\/li\u003e\n\u003cli\u003eMaterial Construction: Brass\u003c\/li\u003e\n\u003cli\u003eMale thread, hose barb\u003c\/li\u003e\n\u003cli\u003e(inch) Male 1\/4\" NPT x 3\/8\" Barb \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Use thread sealant on all threads\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42612625965145,"sku":"98326","price":8.84,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-universal-brass-fuel-hose-fitting-14-npt-x-38-barb-7498057.jpg?v=1761803889"},{"product_id":"trident-marine-5-16-a1-15-reel-low-permeation-fuel-line-hose-black-sold-by-the-foot","title":"Trident Marine 5\/16\" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003eTrident Marine 5\/16\" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot\u003c\/strong\u003e is organized for fuel system parts shoppers who need a clear, professional marine parts buying experience.\u003c\/p\u003e\u003cp\u003e5\/16\" A1-15 Reel Low Permeation Fuel Line Hose - Black - Sold by the Foot Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber. Features: Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone Also provides excellent bend-ability NMMA Type Accepted \u0026amp; CE certified Application: Marine Fuel Hose for distribution, return, vent and transfer For all marine\u003c\/p\u003e\u003ch3\u003eFitment \u0026amp; Product Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand \/ Manufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber, nylon\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eSearch-optimized by brand, system, part type, and fitment cues.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your original part number, engine model, and application before ordering.\u003c\/li\u003e\n\u003cli\u003eBuilt for boat owners, e-commerce shoppers, and professional marine service teams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612766048345,"sku":"98943","price":5.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-516-a1-15-reel-low-permeation-fuel-line-hose-black-sold-by-the-foot-6151900.jpg?v=1761802946"},{"product_id":"trident-marine-3-8-low-permeation-type-a1-15-fuel-line-hose-black-sold-by-the-foot","title":"Trident Marine 3\/8\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003eTrident Marine 3\/8\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot\u003c\/strong\u003e is organized for fuel system parts shoppers who need a clear, professional marine parts buying experience.\u003c\/p\u003e\u003cp\u003e3\/8\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation, and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. Features: Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone Also provides excellent bend-ability NMMA Type Accepted \u0026amp; CE certified Applications: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuel\u003c\/p\u003e\u003ch3\u003eFitment \u0026amp; Product Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand \/ Manufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber, nylon\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eSearch-optimized by brand, system, part type, and fitment cues.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your original part number, engine model, and application before ordering.\u003c\/li\u003e\n\u003cli\u003eBuilt for boat owners, e-commerce shoppers, and professional marine service teams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612823949401,"sku":"99612","price":6.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-38-low-permeation-type-a1-15-fuel-line-hose-black-sold-by-the-foot-9785661.jpg?v=1761802073"},{"product_id":"regitar-usa-marine-fuel-pump-assembly-f-volvo-penta-fits-most-8-1l-engines","title":"Regitar USA Marine Fuel Pump Assembly f\/Volvo Penta: Fits Most 8.1L Engines","description":"\u003cp\u003e\u003cstrong\u003eMarine Fuel Pump Assembly for Volvo Penta: Fits Most 8.1L Engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFuel Pump Assembly for Volvo Penta: Fits most 8.1L engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Brand:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVolvo Penta\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e8.1GiE-P \u0026amp; 8.1GXiE-P\u003c\/li\u003e\n\u003cli\u003e8.1GiCE-P \u0026amp; 8.1GiCE-Q\u003c\/li\u003e\n\u003cli\u003e8.1lPSCE-PF, 8.1IPSCE-Q, \u0026amp; 8.1IPSCE-P\u003c\/li\u003e\n\u003cli\u003e8.1Gi-F, 8.1Gi-FF, 8.1GXi-E, 8.1GXi-EF, 8.1OSi-B, 8.1OSi-BF, 8.1GiI-F, \u0026amp; 8.1GXiI-E\u003c\/li\u003e\n\u003cli\u003e8.1Gi-G, 8.1Gi-GF, 8.1GXi-F, 8.1GXi-FF, 8.1OSi-C, \u0026amp; 8.1OSi-CF\u003c\/li\u003e\n\u003cli\u003e8.1GiI-G \u0026amp; 8.1GXiI-F\u003c\/li\u003e\n\u003cli\u003e8.1Gi-H, 8.1Gi-HF, 8.1GXi-G, 8.1GXi-GF, 8.1OSi-D, \u0026amp; 8.1OSi-DF\u003c\/li\u003e\n\u003cli\u003e8.1GiI-H \u0026amp; 8.1GXiI-G, 8.1IPSCE-JF \u0026amp; 8.1IPSCE-MF\u003c\/li\u003e\n\u003cli\u003e8.1Gi-J, 8.1Gi-JF, 8.1OSi-J, 8.1OSi-JF, 8.1GXi-J, \u0026amp; 8.1GXi-JF\u003c\/li\u003e\n\u003cli\u003e8.1GiE-JF, 8.1GiE-J, 8.1OSiE-JF, 8.1OSiE-J, 8.1GXiE-JF, 8.1GXiE-J, 8.1GiE-K, 8.1GiE-KF\u003c\/li\u003e\n\u003cli\u003e8.1GXiE-K, 8.1GXiE-KF, 8.1GiE-M, 8.1GiE-MF, 8.1GXiE-M, 8.1GXiE-MF, \u0026amp; 8.1GXi-MF\u003c\/li\u003e\n\u003cli\u003e8.1IPSE-JF\u003c\/li\u003e\n\u003cli\u003e3.0GXiC-J \u0026amp; 3.0GXi-J\u003c\/li\u003e\n\u003cli\u003e8.1GiC-400-J, 8.1GiC-400-JF, \u0026amp; 8.1GiC-400-Q\u003c\/li\u003e\n\u003cli\u003e8.1GiCE-J, 8.1GiCE-JF, 8.1GiCE-M, \u0026amp; 8.1GiCE-MF\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Regitar U.S.A.","offers":[{"title":"Default Title","offer_id":42612832862297,"sku":"107710","price":714.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/regitar-usa-marine-fuel-pump-assembly-fvolvo-penta-fits-most-81l-engines-6481909.jpg?v=1761802024"},{"product_id":"trident-marine-5-16-x-50-39-boxed-low-permeation-type-a1-15-fuel-line-hose-black","title":"Trident Marine 5\/16\" x 50\u0026#39; Boxed Low Permeation Type A1-15 Fuel Line Hose - Black","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" x 50' Boxed Low Permeation Type A1-15 Fuel Line Hose - Black\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose (distribution, return, vent and transfer)\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15 m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.611 \/ (mm) 15.5\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 400 \/ (mpa) 2.76\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 100 \/ (mpa) 0.69\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 1.75\" \/ (mm) 44.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 13.3 \/ (kg\/m) 0.198\u003c\/li\u003e\n\u003cli\u003ePermeation Rate: \u0026lt;10 (Standard is 10g\/m2\/24 hrs (CE10)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #365 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, USCG Type A1-15; CARB Executive Order RM-17-008 and EPA Certified low permeation Type A1-10\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42612968390745,"sku":"98797","price":155.88,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-516-x-5039-boxed-low-permeation-type-a1-15-fuel-line-hose-black-2221713.jpg?v=1761801410"},{"product_id":"trident-marine-1-1-2-x-50-39-coil-type-a2-fuel-fill-hose","title":"Trident Marine 1-1\/2\" x 50\u0026#39; Coil Type A2 Fuel Fill Hose","description":"\u003cp\u003e\u003cstrong\u003e1-1\/2\" x 50' Coil Type A2 Fuel Fill Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 1-1\/2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15.24 m) Coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 1\/2\" \/ (mm) 38\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2 \/ (mm) 51\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 60 \/ (mpa) 0.41\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 5.5\" \/ (mm) 140\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42613031895129,"sku":"98953","price":550.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-1-12-x-5039-coil-type-a2-fuel-fill-hose-6705427.jpg?v=1761801040"},{"product_id":"trident-marine-3-8-x-50-39-boxed-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray","title":"Trident Marine 3\/8\" x 50\u0026#39; Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so the fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e: \u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester \u003cspan style=\"background-color: initial;\"\u003ePlies \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"background-color: initial;\"\u003eTemperature\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e Range: \u003c\/span\u003e-20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLength: 50’ (15m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 3\/8\" \/ (mm) 9.50\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.588 \/ (mm) 14.9\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 4\" \/ (mm) 101.6\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 10.5 \/ (kg\/m) 0.156\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42613036154969,"sku":"98799","price":145.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-38-x-5039-boxed-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-9442357.jpg?v=1761801004"},{"product_id":"sta-bil-marine-tune-up","title":"STA-BIL Marine Tune-Up","description":"\u003cp\u003e\u003cstrong\u003eMarine Tune-Up\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhen watersport engines are running rough, it’s time for STA-BIL® Marine Tune-Up. The easy-to-use additive pours directly into the fuel tank to address issues caused by ethanol-blended fuels or plain old, neglected fuel systems. One treatment is enough to restore lost engine performance in any gasoline-powered watercraft like jet skis, speed boats, and PWCs. Try it next time the engine seems to be running a bit rough, unlike you remember it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFormulated For\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAny gasoline-powered watercraft like jet skis, speed boats, and PWCs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTop Benefits:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasily cleans carbs and injectors\u003c\/li\u003e\n\u003cli\u003eTreats 20 gallons of fuel\u003c\/li\u003e\n\u003cli\u003eQuickly resolves rough-running engines\u003c\/li\u003e\n\u003cli\u003eDissolves gum and varnish build-up\u003c\/li\u003e\n\u003cli\u003ePerfect for small boats and personal watercraft (PWCs)\u003c\/li\u003e\n\u003cli\u003eCompatible with all gasoline marine engines\u003c\/li\u003e\n\u003cli\u003eGreat to use as a “tune-up” throughout boating season\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDirections for Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse 1oz of STA-BIL® Marine Tune-Up for every 2.5 gallons of fuel.\u003c\/li\u003e\n\u003cli\u003eOnce users measure out the correct ratio, pour STA-BIL® Marine Tune-Up directly into the gas tank of the marine vessel\u003c\/li\u003e\n\u003cli\u003eAfter pouring in the additive, top off the gas tank with fresh fuel\u003c\/li\u003e\n\u003cli\u003eFinally, start the engine and let it run for 15 minutes uninterrupted\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSize: 8 oz\u003c\/li\u003e\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"STA-BIL","offers":[{"title":"Default Title","offer_id":42613088223321,"sku":"103884","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/sta-bil-marine-tune-up-7141208.jpg?v=1761800317"},{"product_id":"trident-marine-4-39-white-stern-flex-hose-w-transom-flange","title":"Trident Marine 4\u0026#39; White Stern Flex Hose w\/Transom Flange","description":"\u003cp\u003e\u003cstrong\u003e4' White Stern Flex Hose with Transom Flange\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Trident Stern Flex Hose is white (Trident Marine 129W series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142W-2000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHighly resistant to crushing, abrasion, and UV and has good resistance to chemicals \u003c\/li\u003e\n\u003cli\u003eExtraordinary flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHose: Lightweight polyethylene copolymer\u003c\/li\u003e\n\u003cli\u003eReinforcement: Integral Polyethylene Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40°F to 140°F (-40ºC to 60ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eInner Diameter: (inch) 2” \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.35” \/ (mm) 60\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3.5” \/ (mm) 88.9\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 26 \/ (kg\/m) 11.8\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42613107818585,"sku":"99761","price":29.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-439-white-stern-flex-hose-wtransom-flange-5298456.jpg?v=1761800038"},{"product_id":"trident-marine-2-x-50-39-coil-type-a2-fuel-fill-hose","title":"Trident Marine 2\" x 50\u0026#39; Coil Type A2 Fuel Fill Hose","description":"\u003cp\u003e\u003cstrong\u003e2\" x 50' Coil Type A2 Fuel Fill Hose\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for fill and vent plus diesel distribution\u003c\/li\u003e\n\u003cli\u003eApproved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube \u0026amp; Cover: NBR \/ Neoprene \u003c\/li\u003e\n\u003cli\u003eReinforcement: High tenacity polyester 2 spiral, spring steel helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/li\u003e\n\u003cli\u003eLength: 50 ft. (15.24 m) Coil\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 2\" \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.48 \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWall: (inch) 0.25 \/ (mm) 6.4\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.345\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 7.0\" \/ (mm) 178\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #327 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted, CE certified, and Lloyds Registry Type Approved\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42613144977497,"sku":"98954","price":876.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-2-x-5039-coil-type-a2-fuel-fill-hose-4404659.jpg?v=1761799589"},{"product_id":"regitar-usa-marine-fuel-pump-assembly-f-mercury-mercruiser-engines-fits-mcm-mie-4-3l-v6-amp-5-0l-v8-gen-amp-some-350-ci-carburetors","title":"Regitar USA Marine Fuel Pump Assembly f\/Mercury\/Mercruiser Engines: Fits MCM\/MIE 4.3L\/V6 \u0026amp; 5.0L\/V8 Gen+ \u0026amp; Some 350 ci Carburetors","description":"\u003cp\u003e\u003cstrong\u003eMarine Fuel Pump Assembly for Mercury\/Mercruiser Engines: Fits MCM\/MIE 4.3L\/V6 \u0026amp; 5.0L\/V8 Gen+ \u0026amp; Some 350 ci Carburetors\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFuel Pump Assembly for Mercury\/Mercruiser engines: Fits MCM\/MIE 4.3L\/V6 and 5.0L\/V8 Gen+ and some 350 ci carburetors.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Brand:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMercruiser\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1998 MERCURY MARINE Fuel Pump 4.3L 262\u003c\/li\u003e\n\u003cli\u003e2000 MERCURY MARINE Fuel Pump 5.0L 305\u003c\/li\u003e\n\u003cli\u003e2000 MERCURY MARINE Fuel Pump 5.7L 350\u003c\/li\u003e\n\u003cli\u003eFits with MCM\/MIE 4.3L\/V6 and 5.0L\/V8 Gen+ and some 350 ci carburetors\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Regitar U.S.A.","offers":[{"title":"Default Title","offer_id":42613147566169,"sku":"107711","price":127.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/regitar-usa-marine-fuel-pump-assembly-fmercurymercruiser-engines-fits-mcmmie-43lv6-amp-50lv8-gen-amp-some-350-ci-carburetors-7282084.jpg?v=1761799481"},{"product_id":"attwood-mercury-fuel-line-kit-3-8-dia-x-6-39-length-w-fuel-demand-valve","title":"Attwood Mercury Fuel Line Kit - 3\/8\" Dia. x 6\u0026#39; Length w\/Fuel Demand Valve","description":"\u003cp\u003e\u003cstrong\u003eMercury Fuel Line Kit - 3\/8\" Dia. x 6' Length with Fuel Demand Valve\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3\/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThese Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6\u003c\/li\u003e\n\u003cli\u003eIt also includes a multi-layer low-permeation primer bulb and a Fuel Demand Value that eliminates engine flooding and spillage by preventing pressurized fuel from reaching the engine.\u003c\/li\u003e\n\u003cli\u003eHose and tank fittings come with pre-applied thread sealant\u003c\/li\u003e\n\u003cli\u003eFor Mercury engines and tanks\u003c\/li\u003e\n\u003cli\u003eTank Side: Universal Sprayless Quick-Connect\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*This Fuel Line Kit is compatible with Ethanol blended fuels and with all OEM-brand engines\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42613306818649,"sku":"98215","price":90.8,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-mercury-fuel-line-kit-38-dia-x-639-length-wfuel-demand-valve-3724545.jpg?v=1761799415"},{"product_id":"trident-marine-5-16-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-sold-by-the-foot","title":"Trident Marine 5\/16\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.500 \/ (mm) 12.7\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2.5\" \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 7.8 \/ (kg\/m) 0.116\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42613559033945,"sku":"99616","price":5.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-516-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-sold-by-the-foot-3214398.jpg?v=1761796983"},{"product_id":"attwood-yamaha-tank-fitting-1-4-npt-thread","title":"Attwood Yamaha Tank Fitting - 1\/4\" NPT Thread","description":"\u003cp\u003e\u003cstrong\u003eYamaha Tank Fitting - 1\/4\" NPT Thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConnect your tank and fuel lines with confidence. Solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Designed for Yamaha Brand engines and tanks and fits select Mercury\/Mariner Brand engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eQuick-connect 1\/4-inch male thread makes installation easy\u003c\/li\u003e\n\u003cli\u003eSolid machined brass for dependable performance and peace of mind\u003c\/li\u003e\n\u003cli\u003eDesigned for Yamaha and select Mercury\/Mariner brand engines that use leaded, unleaded, and alcohol-blended fuel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part numbers: 8896LP6 \u0026amp; 88FHY516-6\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42613585707097,"sku":"98230","price":11.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-yamaha-tank-fitting-14-npt-thread-9548299.jpg?v=1761796510"},{"product_id":"attwood-suzuki-3-8-barb-female-hose-fitting-under-75hp","title":"Attwood Suzuki 3\/8\" Barb Female Hose Fitting - Under 75HP","description":"\u003cp\u003e\u003cstrong\u003eSuzuki 3\/8\" Barb Female Hose Fitting - Under 75HP\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eQuick-connect female fitting for use on both ends of fuel lines to connect to tank fitting and engine. Fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits a 3\/8\" I.D. hose. Also, clamps are not included, and use thread sealant on all threads.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuzuki-brand engines and tanks\u003c\/li\u003e\n\u003cli\u003eFitted for models under 75HP (Small Bore)\u003c\/li\u003e\n\u003cli\u003eMaterial Construction: Chrome-plated Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part number: 14509-6\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42613730508889,"sku":"98237","price":16.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-suzuki-38-barb-female-hose-fitting-under-75hp-9318918.jpg?v=1761794998"},{"product_id":"regitar-usa-marine-fuel-pump-assembly-f-volvo-penta-4-3l-through-5-7g1-engines","title":"Regitar USA Marine Fuel Pump Assembly f\/Volvo Penta: 4.3L Through 5.7G1 Engines","description":"\u003cp\u003e\u003cstrong\u003eMarine Fuel Pump Assembly for Volvo Penta: 4.3L Through 5.7G1 Engines\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eFuel Pump Assembly for Volvo Penta: 4.3L through 5.7G1 engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Brand:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eVolvo Penta\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e4.3L \u003c\/li\u003e\n\u003cli\u003e4.3GXi\u003c\/li\u003e\n\u003cli\u003e4.3OSi\u003c\/li\u003e\n\u003cli\u003e5.0L\u003c\/li\u003e\n\u003cli\u003e5.0GXi\u003c\/li\u003e\n\u003cli\u003e5.0OSi\u003c\/li\u003e\n\u003cli\u003e5.7L\u003c\/li\u003e\n\u003cli\u003e5.7OSXi\u003c\/li\u003e\n\u003cli\u003e5.7Gi\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Regitar U.S.A.","offers":[{"title":"Default Title","offer_id":42613759705177,"sku":"107709","price":396.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/regitar-usa-marine-fuel-pump-assembly-fvolvo-penta-43l-through-57g1-engines-2511509.jpg?v=1761794616"},{"product_id":"attwood-in-line-fuel-overflow-protector","title":"Attwood In-Line Fuel Overflow Protector","description":"\u003cp\u003e\u003cstrong\u003eIn-Line Fuel Overflow Protector\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eThe fuel vent line surge protector helps avoid refueling spills because the surge-free line causes automatic fuel nozzles to shut off as the tank fills.\u003c\/p\u003e\u003cp\u003eWith non-automatic nozzles, the surge protector causes a gurgling sound to indicate that the tank is full.\u003c\/p\u003e\u003cp\u003eIncorporates a ball-style check valve with internal baffling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMeets ABYC Standard H-24\u003c\/li\u003e\n\u003cli\u003eInstall in-line with traditional tank vent systems that use standard 5\/8\" ID vent hose\u003c\/li\u003e\n\u003cli\u003eCompact size and operates in any orientation within 45° of vertical\u003c\/li\u003e\n\u003cli\u003eWithstands oil, gas, alcohol-blended fuels\u003c\/li\u003e\n\u003cli\u003eIncludes 2 hose clamps for installation in the vent hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cimg src=\"https:\/\/productimageserver.com\/prop65\/6pt.png\" alt=\"Warning\"\u003e\u003cstrong\u003eWARNING:\u003c\/strong\u003e This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to \u003ca href=\"http:\/\/P65Warnings.ca.gov\"\u003eP65Warnings.ca.gov\u003c\/a\u003e.\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42613776613465,"sku":"109649","price":28.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-in-line-fuel-overflow-protector-4869986.jpg?v=1761794433"},{"product_id":"trident-marine-5-8-type-a2-fuel-amp-vent-line-hose-black-sold-by-the-foot","title":"Trident Marine 5\/8\" Type A2 Fuel \u0026amp; Vent Line Hose - Black - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e5\/8\" Type A2 Fuel \u0026amp; Vent Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” A2 Fuel Hose for gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). This hose is built with the best fuel, fire and age resistant formulation.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot\u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso provides excellent bend-ability\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Nylon Internal Barrier, NBR \u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend \u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC) \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/8\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960 \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 25.84 \/ (kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42613804433497,"sku":"99614","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-58-type-a2-fuel-amp-vent-line-hose-black-sold-by-the-foot-7343953.jpg?v=1761794074"},{"product_id":"attwood-outboard-fuel-filter-universal","title":"Attwood Outboard Fuel Filter - Universal","description":"\u003cp\u003e\u003cstrong\u003eOutboard Fuel Filter - Universal\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eDisposable high-flow in-line fuel filters work with most outboard motors. Protects carbureted engines by trapping pollutants. A clear body allows visual inspection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eA clear body allows visual inspection, making it easier to stay on top of maintenance\u003c\/li\u003e\n\u003cli\u003eHigh-strength, impact-resistant, and shatter-resistant construction is ideal for  tough conditions\u003c\/li\u003e\n\u003cli\u003eUniversal In-Line Fuel Filter, for 1\/4\", 5\/16\", 3\/8 inch fuel lines\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Best to replace during winterize or spring start-up for optimum results\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42613873377369,"sku":"98365","price":11.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-outboard-fuel-filter-universal-8856415.jpg?v=1761793431"},{"product_id":"trident-marine-10-39-white-stern-flex-hose-w-transom-flange","title":"Trident Marine 10\u0026#39; White Stern Flex Hose w\/Transom Flange","description":"\u003cp\u003e\u003cstrong\u003e10' White Stern Flex Hose with Transom Flange\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Trident Stern Flex Hose is white (Trident Marine 129W series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142W-2000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHighly resistant to crushing, abrasion, and UV and has good resistance to chemicals \u003c\/li\u003e\n\u003cli\u003eExtraordinary flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHose: Lightweight polyethylene copolymer\u003c\/li\u003e\n\u003cli\u003eReinforcement: Integral Polyethylene Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40°F to 140°F (-40ºC to 60ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: White\u003c\/li\u003e\n\u003cli\u003eInner Diameter: (inch) 2” \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.35” \/ (mm) 60\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3.5” \/ (mm) 88.9\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 26 \/ (kg\/m) 11.8\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42614265774169,"sku":"99760","price":62.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-1039-white-stern-flex-hose-wtransom-flange-8133124.jpg?v=1761791425"},{"product_id":"attwood-standard-carbon-canister","title":"Attwood Standard Carbon Canister","description":"\u003cp\u003e\u003cstrong\u003eStandard Carbon Canister\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBrackets OEM Installed\u003c\/li\u003e\n\u003cli\u003eLow permeation shell reduces overall system emissions\u003c\/li\u003e\n\u003cli\u003eCan be mounted in any orientation using brackets provided\u003c\/li\u003e\n\u003cli\u003eEPA \/ CARB Certified\u003c\/li\u003e\n\u003cli\u003eFits a 5\/8\" vent hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrailerable Vessel Capacity (EPA Rating): 220 Gallon\u003c\/li\u003e\n\u003cli\u003eNon-Trailerable Vessel Capacity (EPA Rating): 350 Gallon\u003c\/li\u003e\n\u003cli\u003eTrailerable Vessel Capacity (CARB Rating): 176 Gallon\u003c\/li\u003e\n\u003cli\u003eNon-Trailerable Vessel Capacity (CARB Rating): 350 Gallon \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Compatible with Ethanol blended fuels\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42614325739609,"sku":"98350","price":129.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-standard-carbon-canister-6445139.jpg?v=1761791213"},{"product_id":"trident-marine-2-type-a2-fuel-fill-hose-sold-by-the-foot","title":"Trident Marine 2\" Type A2 Fuel Fill Hose - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003eTrident Marine 2\" Type A2 Fuel Fill Hose - Sold by the Foot\u003c\/strong\u003e is organized for fuel system parts shoppers who need a clear, professional marine parts buying experience.\u003c\/p\u003e\u003cp\u003e2\" Type A2 Fuel Fill Hose - Sold by the Foot Trident 2\" ID A2 fuel fill hose for gasoline (including ethanol blends) and diesel (including bio diesel blends). Features: Sold by the foot This hose is built with the best fuel, fire, and age-resistant formulation Provides extraordinary resistance to aging, fire, heat, cold, and the ozone Also, provides excellent bend-ability Applications: Marine Fuel Hose for fill and vent plus diesel distribution Approved, for all marine fuels including gasoline, alcohol blends, diesel and bio-diesel Construction: Tube \u0026amp; Cover: NBR \/ Neoprene Reinforcement: High tenacity polyester 2 spiral, spring steel helix Temperature Range: -20°F to 212°F (-20ºC to 100ºC) \u003c\/p\u003e\u003ch3\u003eFitment \u0026amp; Product Details\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eBrand \/ Manufacturer: Trident Marine\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eSearch-optimized by brand, system, part type, and fitment cues.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your original part number, engine model, and application before ordering.\u003c\/li\u003e\n\u003cli\u003eBuilt for boat owners, e-commerce shoppers, and professional marine service teams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42614328000601,"sku":"99618","price":27.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-2-type-a2-fuel-fill-hose-sold-by-the-foot-6830396.jpg?v=1761791212"},{"product_id":"trident-marine-5-16-low-permeation-type-a1-15-fuel-line-hose-black-sold-by-the-foot","title":"Trident Marine 5\/16\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003eTrident Marine 5\/16\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot\u003c\/strong\u003e is organized for fuel system parts shoppers who need a clear, professional marine parts buying experience.\u003c\/p\u003e\u003cp\u003e5\/16\" Low Permeation Type A1-15 Fuel Line Hose - Black - Sold by the Foot Trident Barrier Lined A1-15 Fuel Hose for both gasoline (including ethanol blends up to 85%) and diesel (including bio diesel blends up to B100). This hose is built with the best fuel, fire, and age-resistant formulation and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. Features: Sold by the foot Provides extraordinary resistance to fuel permeation, aging, and also to fire, heat, cold, and the ozone Also provides excellent bend-ability NMMA Type Accepted \u0026amp; CE certified Applications: Marine Fuel Hose (distribution, return, vent and transfer) For all marine fuel\u003c\/p\u003e\u003ch3\u003eFitment \u0026amp; Product Details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBrand \/ Manufacturer: Trident Marine\u003c\/li\u003e\n\u003cli\u003eMaterial: rubber, nylon\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003eSearch-optimized by brand, system, part type, and fitment cues.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with your original part number, engine model, and application before ordering.\u003c\/li\u003e\n\u003cli\u003eBuilt for boat owners, e-commerce shoppers, and professional marine service teams.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42614584213593,"sku":"99613","price":6.12,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-516-low-permeation-type-a1-15-fuel-line-hose-black-sold-by-the-foot-1430198.jpg?v=1761259509"},{"product_id":"perko-combination-vented-gas-fill-tank-f-1-1-2-hose-35-deg-angled-neck","title":"Perko Combination Vented Gas Fill\/Tank f\/1-1\/2\" Hose - 35\u0026deg; Angled Neck","description":"\u003cp\u003e\u003cstrong\u003eCombination Vented Gas Fill\/Tank for 1-1\/2\" Hose - 35° Angled Neck \u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e35° Angled Neck\u003c\/li\u003e\n\u003cli\u003eBlack Polymer\u003c\/li\u003e\n\u003cli\u003eIntegral Tank Vent with Flame Arrestor\u003c\/li\u003e\n\u003cli\u003eNo Ground Wire Required\u003c\/li\u003e\n\u003cli\u003eFlip Top Cap\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor Hose Size: 1-1\/2\"\u003c\/li\u003e\n\u003cli\u003eFor Vent Size: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eNeck Length: 2-7\/16 \"\u003c\/li\u003e\n\u003cli\u003eScrew Size: #10\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Perko","offers":[{"title":"Default Title","offer_id":42614676258905,"sku":"73298","price":34.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/perko-combination-vented-gas-filltank-f1-12-hose-35deg-angled-neck-9487865.jpg?v=1761259340"},{"product_id":"trident-marine-5-8-rdquo-a2-fuel-amp-vent-line-hose-black-sold-by-the-foot","title":"Trident Marine 5\/8\u0026rdquo; A2 Fuel \u0026amp; Vent Line Hose - Black - Sold by the Foot","description":"\u003cp\u003e\u003cstrong\u003e5\/8” A2 Fuel \u0026amp; Vent Line Hose - Black - Sold by the Foot\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTrident 5\/8” ID A2 Fuel Hose is a gasoline vent hose (including ethanol blends) and diesel (including bio diesel blends). \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSold by the foot \u003c\/li\u003e\n\u003cli\u003eThis hose is built with the best fuel, fire, and age-resistant formulation \u003c\/li\u003e\n\u003cli\u003eProvides extraordinary resistance to aging, fire, heat, cold, and the ozone \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent bend-ability\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for vent and diesel distribution \u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends, diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: NBR\u003c\/li\u003e\n\u003cli\u003eCover: NBR\/PVC Blend\u003c\/li\u003e\n\u003cli\u003eReinforcement: Polyester 2 spiral\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"background-color: initial;\"\u003eTemperature\u003c\/span\u003e\u003cspan style=\"background-color: initial;\"\u003e Range:\u003cstrong\u003e \u003c\/strong\u003e-20°F to 212°F (-28ºC to 100ºC)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"background-color: initial;\"\u003eLength: Sold by the Foot\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 0.625\" \/ (mm) 15.9\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.960\" \/ (mm) 24.4\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 200 \/ (mpa) 1.38\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 50 \/ (mpa) 0.34\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3\" \/ (mm) 76.2\u003c\/li\u003e\n\u003cli\u003eWeight: (Lb.\/100ft.) 25.84 \/ (Kg\/m) 11.72\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #317 series exceeds ABYC H-24 \u0026amp; H-33, SAE J1527, ISO 7840, \u0026amp; USCG Type A2; and is NMMA Type Accepted \u0026amp; CE certified.\u003c\/p\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42614756933721,"sku":"98942","price":6.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-58rdquo-a2-fuel-amp-vent-line-hose-black-sold-by-the-foot-7060681.jpg?v=1761258752"},{"product_id":"attwood-universal-fuel-water-separator-kit-w-bracket","title":"Attwood Universal Fuel\/Water Separator Kit w\/Bracket","description":"\u003cp\u003e\u003cstrong\u003eUniversal Fuel\/Water Separator Kit with Bracket\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability and fits all 2 and 4-cycle engines.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e10 Micron Filter and bracket included\u003c\/li\u003e\n\u003cli\u003eOutfitted with 2 brass plugs for secure connections and universal 3\/8 inch (.85cm) ports\u003c\/li\u003e\n\u003cli\u003eDouble seal for enhanced performance\u003c\/li\u003e\n\u003cli\u003eReplaces Mercury 35-60494A4\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42614766862425,"sku":"98362","price":29.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-universal-fuelwater-separator-kit-wbracket-8537216.jpg?v=1761258702"},{"product_id":"regitar-usa-fuel-pump-f-mercruiser-w-high-pressure-pump","title":"Regitar USA Fuel Pump f\/Mercruiser w\/High-Pressure Pump","description":"\u003cp\u003e\u003cstrong\u003eFuel Pump for Mercruiser with High-Pressure Pump\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFuel Pump for Mercruiser with High-Pressure Pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Brand:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMercruiser\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli id=\"isPasted\"\u003eGM V-8 (305, 350, 377, 496 \u0026amp; 502 CID) Eng. with Gen III Cool Fuel Module - High-Pressure\u003c\/li\u003e\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Regitar U.S.A.","offers":[{"title":"Default Title","offer_id":42614890332249,"sku":"107714","price":114.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/regitar-usa-fuel-pump-fmercruiser-whigh-pressure-pump-3981385.jpg?v=1761257915"},{"product_id":"attwood-portable-fuel-tank-12-gallon-w-o-gauge","title":"Attwood Portable Fuel Tank - 12 Gallon w\/o Gauge","description":"\u003cp\u003e\u003cstrong\u003ePortable Fuel Tank - 12 Gallon without Gauge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 Gallon fuel capacity\u003c\/li\u003e\n\u003cli\u003eCompatible with 1\/4-inch NPT fuel fittings\u003c\/li\u003e\n\u003cli\u003eAdditional oil and ullage\/vapor capacity\u003c\/li\u003e\n\u003cli\u003eEPA Cap with automatic, high-flow vacuum valve\u003c\/li\u003e\n\u003cli\u003eUV-grade multi-layer tank material\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems\u003c\/li\u003e\n\u003cli\u003eCap with built-in vacuum valve means no need for manual venting\u003c\/li\u003e\n\u003cli\u003eMeets EPA and CARB (California Air Resources Board) regulations\u003c\/li\u003e\n\u003cli\u003eComplies with all ABYC\/NMMA requirements for portable marine fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLength: (inch) 22.75\"\u003c\/li\u003e\n\u003cli\u003eWidth: (inch) 14.25\"\u003c\/li\u003e\n\u003cli\u003eHeight: (inch) 14.47\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*No gauge or fuel line included\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42614906617945,"sku":"98377","price":148.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-portable-fuel-tank-12-gallon-wo-gauge-5179498.jpg?v=1761257780"},{"product_id":"trident-marine-10-39-black-stern-flex-hose-w-transom-flange","title":"Trident Marine 10\u0026#39; Black Stern Flex Hose w\/Transom Flange","description":"\u003cp\u003e\u003cstrong\u003e10' Black Stern Flex Hose with Transom Flange\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Trident Stern Flex Hose is black (Trident Marine 129 series) and contains wire, control cables, and hoses between the transom and outboard engine(s). Connects to Trident flange part #142-2000.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHighly resistant to crushing, abrasion, and UV and has good resistance to chemicals \u003c\/li\u003e\n\u003cli\u003eExtraordinary flexibility\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHose: Lightweight polyethylene copolymer\u003c\/li\u003e\n\u003cli\u003eReinforcement: Integral Polyethylene Helix\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40°F to 140°F (-40ºC to 60ºC)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eInner Diameter: (inch) 2” \/ (mm) 50.8\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 2.35” \/ (mm) 60\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 3.5” \/ (mm) 88.9\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 26 \/ (kg\/m) 11.8\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42614907535449,"sku":"99758","price":80.32,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-1039-black-stern-flex-hose-wtransom-flange-9724250.jpg?v=1761257779"},{"product_id":"regitar-usa-marine-fuel-pump-assembly-f-volvo-penta-fits-most-all-carburated-4-3-5-0-amp-5-7-engines-from-1992-2006","title":"Regitar USA Marine Fuel Pump Assembly f\/Volvo Penta: Fits Most All Carburated 4.3, 5.0, \u0026amp; 5.7 Engines From 1992-2006","description":"\u003cp\u003e\u003cstrong\u003eMarine Fuel Pump Assembly for Volvo Penta: Fits Most All Carburated 4.3, 5.0, \u0026amp; 5.7 Engines From 1992-2006\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eFuel Pump Assembly for Volvo Penta: Fits most all carburated 4.3, 5.0, and 5.7 engines from 1992-2006.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEngine Brand:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVolvo Penta\u003c\/li\u003e\n\u003cli\u003eEvinrude\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits most all carburated 4.3, 5.0, 5.7 engines from 1992-2006\u003c\/li\u003e\n\u003cli\u003e4.3GL-A, 4.3GL-B, 4.3GL-C, 4.3GL-D, 4.3GL-E, 4.3GL-EF, 4.3GL-G, 4.3GL-GF\u003c\/li\u003e\n\u003cli\u003e5.0GL-A, 5.0GL-B, 5.0GL-C, 5.0GL-D, 5.0GL-E, 5.0GL-F, 5.0GL-FF, 5.0GL-H, 5.0GL-HF\u003c\/li\u003e\n\u003cli\u003e5.7GL-A, 5.7GL-B, 5.7GL-C, 5.7GL-D, 5.7GL-E\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Regitar U.S.A.","offers":[{"title":"Default Title","offer_id":42615044374617,"sku":"107712","price":127.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/regitar-usa-marine-fuel-pump-assembly-fvolvo-penta-fits-most-all-carburated-43-50-amp-57-engines-from-1992-2006-8621083.jpg?v=1761256685"},{"product_id":"attwood-chrysler-suzuki-tank-fitting-1-4-npt-thread","title":"Attwood Chrysler\/Suzuki Tank Fitting - 1\/4\" NPT Thread","description":"\u003cp\u003e\u003cstrong\u003eChrysler\/Suzuki Tank Fitting - 1\/4\" NPT Thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Tank Male Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1\/4\" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMale tank fitting designed for Chrysler \u0026amp; Suzuki engines and fuel tanks\u003c\/li\u003e\n\u003cli\u003eDesigned for Under 75HP (Small Bore)\u003c\/li\u003e\n\u003cli\u003eMaterial Construction: Chrome-plated Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part numbers: 8884-6 \u0026amp; 88FTS014-6\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42615054958681,"sku":"98235","price":7.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-chryslersuzuki-tank-fitting-14-npt-thread-1958055.jpg?v=1761256615"},{"product_id":"trident-marine-5-16-x-50-39-boxed-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray","title":"Trident Marine 5\/16\" x 50\u0026#39; Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray","description":"\u003cp\u003e\u003cstrong\u003e5\/16\" x 50' Boxed Barrier Lined B1-15 EPA Compliant Outboard Fuel Line Hose - Gray\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis hose is built with the best fuel and age-resistant formulations and a unique \"Barrier Liner\" on the inside surface of the tube, so fuel is not in direct contact with rubber. This greatly reduces fuel permeation and prevents ethanol degradation of the rubber tube, which can cause small pieces of rubber to reach and damage the engine. That is particularly important considering the prospect of higher ethanol blends (E-15) available at gas stations next year. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProvides extraordinary resistance to fuel permeation, aging, heat, cold, and ozone  \u003c\/li\u003e\n\u003cli\u003eAlso, provides excellent rope-like bend-ability and fitting retention\u003c\/li\u003e\n\u003cli\u003eFor both gasoline (including ethanol blends up to E85) and diesel (including bio diesel blends up to 100%)\u003c\/li\u003e\n\u003cli\u003eEPA Certified and CARB Executive Order for low permeation Type B1-15\u003c\/li\u003e\n\u003cli\u003eNMMA Type Accepted \u0026amp; CE certified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplication:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMarine Fuel Hose for distribution, return, vent and transfer\u003c\/li\u003e\n\u003cli\u003eFor all marine fuels including gasoline, alcohol blends (CE-10), diesel and bio-diesel\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eConstruction:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTube: Fluoroplastic Internal Barrier\u003c\/li\u003e\n\u003cli\u003eCover: Gray CPE Rubber\u003c\/li\u003e\n\u003cli\u003eReinforcement: 2-Spiral Polyester Plies \u003c\/li\u003e\n\u003cli\u003eTemperature Range: -20°F to 212°F (-28ºC to 100ºC)\u003c\/li\u003e\n\u003cli\u003eLength: 50’ (15m) Boxed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInner Diameter: (inch) 5\/16\" \/ (mm) 7.92\u003c\/li\u003e\n\u003cli\u003eOuter Diameter: (inch) 0.500 \/ (mm) 12.7\u003c\/li\u003e\n\u003cli\u003eBurst Pressure: (psi) 175 \/ (mpa) 1.21\u003c\/li\u003e\n\u003cli\u003eWorking Pressure: (psi) 35 \/ (mpa) 0.24\u003c\/li\u003e\n\u003cli\u003eBend Radius: (inch) 2.5\" \/ (mm) 63.5\u003c\/li\u003e\n\u003cli\u003eWeight: (lb\/100 ft.) 7.8 \/ (kg\/m) 0.116\u003c\/li\u003e\n\u003cli\u003ePermeation Rate (Standard is (15g\/m^2\/24hrs (CE10)): 5.0\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*The #305 series exceeds ABYC H-24, SAE J1527, ISO 8469 B1, USCG Type B1-15\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Trident Marine","offers":[{"title":"Default Title","offer_id":42615114694745,"sku":"98800","price":139.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/trident-marine-516-x-5039-boxed-barrier-lined-b1-15-epa-compliant-outboard-fuel-line-hose-gray-7720565.jpg?v=1761256009"},{"product_id":"attwood-portable-low-profile-fuel-tank-12-gallon-w-gauge","title":"Attwood Portable Low Profile Fuel Tank - 12 Gallon w\/Gauge","description":"\u003cp\u003e\u003cstrong\u003ePortable Low Profile Fuel Tank - 12 Gallon with Gauge\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e12 Gallon fuel capacity\u003c\/li\u003e\n\u003cli\u003eCompatible with 1\/4-inch NPT fuel fittings\u003cul\u003e\n\u003cli\u003eHigh-Contrast, easy to read gage\u003c\/li\u003e\n\u003cli\u003eSave space; the low profile is 3 inches lower than regular 12-gallon tanks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdditional oil and ullage\/vapor capacity\u003c\/li\u003e\n\u003cli\u003eEPA Cap with automatic, high-flow vacuum valve\u003c\/li\u003e\n\u003cli\u003eUV-grade multi-layer tank material\u003c\/li\u003e\n\u003cli\u003eAutomotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems\u003c\/li\u003e\n\u003cli\u003eCap with built-in vacuum valve means no need for manual venting\u003c\/li\u003e\n\u003cli\u003eMeets EPA and CARB (California Air Resources Board) regulations\u003c\/li\u003e\n\u003cli\u003eComplies with all ABYC\/NMMA requirements for portable marine fuel tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLength: (inch) 24\"\u003c\/li\u003e\n\u003cli\u003eWidth: (inch) 18\"\u003c\/li\u003e\n\u003cli\u003eHeight: (inch) 11.61\"\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*No fuel line included\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42615145267289,"sku":"98380","price":160.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/attwood-portable-low-profile-fuel-tank-12-gallon-wgauge-4352174.jpg?v=1761255699"},{"product_id":"attwood-compact-carbon-canister","title":"Attwood Compact Carbon Canister","description":"\u003cp\u003e\u003cstrong\u003eCompact Carbon Canister\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThis is a single pack that contains two Compact Carbon Canisters\u003c\/li\u003e\n\u003cli\u003eBrackets OEM Installed\u003c\/li\u003e\n\u003cli\u003eLow permeation shell reduces overall system emissions\u003c\/li\u003e\n\u003cli\u003eCan be mounted in any orientation using brackets provided\u003c\/li\u003e\n\u003cli\u003eEPA \/ CARB Certified\u003c\/li\u003e\n\u003cli\u003eFits a 5\/8\" vent hose\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSpecifications: \u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTrailerable Vessel Capacity (EPA Rating): 70 Gallon\u003c\/li\u003e\n\u003cli\u003eNon-Trailerable Vessel Capacity (EPA Rating): 110 Gallon\u003c\/li\u003e\n\u003cli\u003eTrailerable Vessel Capacity (CARB Rating): 56 Gallon\u003c\/li\u003e\n\u003cli\u003eNon-Trailerable Vessel Capacity (CARB Rating): 110 Gallon \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Compatible with Ethanol blended fuels\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886134956121,"sku":"98349","price":117.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/244621464.jpg?v=1764618597"},{"product_id":"attwood-mercury-tank-fitting-1-4-npt-thread","title":"Attwood Mercury Tank Fitting - 1\/4\" NPT Thread","description":"\u003cp\u003e\u003cstrong\u003eMercury Tank Fitting - 1\/4\" NPT Thread\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury\/Mariner Brand engines and tanks.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSolid machined brass for dependable performance, peace of mind\u003c\/li\u003e\n\u003cli\u003eQuick-connect ¼-inch male thread makes installation easy\u003c\/li\u003e\n\u003cli\u003eExtremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel\u003c\/li\u003e\n\u003cli\u003e1\/4\" NPT (National Pipe Thread)\u003c\/li\u003e\n\u003cli\u003eSpecifically designed for Mercury\/Mariner Brand engines and tanks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part number: 8890LP6\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886210158681,"sku":"98221","price":10.77,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/270929387.jpg?v=1764620660"},{"product_id":"attwood-fuel-water-separator","title":"Attwood Fuel\/Water Separator","description":"\u003cp\u003e\u003cstrong\u003eFuel\/Water Separator\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eKeep your engine running at peak efficiency by filtering out any water that may get into the fuel system. 10-micron filtering capability.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDouble seal for enhanced performance\u003c\/li\u003e\n\u003cli\u003eReplacement for: Mercury 35-60494-1, Aqua Power 6031, GLM 24940, Sierra 18-78250, SMI 15494, Valmar 52113, Marpac 7-0872\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886296797273,"sku":"98363","price":10.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/270929695.jpg?v=1764622782"},{"product_id":"attwood-universal-aluminum-fuel-hose-fitting-3-8-npt-x-3-8-barb","title":"Attwood Universal Aluminum Fuel Hose Fitting - 3\/8\" NPT x 3\/8\" Barb","description":"\u003cp\u003e\u003cstrong\u003eUniversal Aluminum Fuel Hose Fitting - 3\/8\" NPT x 3\/8\" Barb\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eFitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan style=\"background-color: initial;\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaterial Construction: Aluminum\u003c\/li\u003e\n\u003cli\u003eMale thread, hose barb\u003c\/li\u003e\n\u003cli\u003e(inch) Male 3\/8\" NPT x 3\/8\" Barb \u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Use thread sealant on all threads\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886304661593,"sku":"98327","price":5.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/270929541.jpg?v=1764623128"},{"product_id":"attwood-honda-tank-fitting-1-4-npt-thread-90hp","title":"Attwood Honda Tank Fitting - 1\/4\" NPT Thread - 90HP+","description":"\u003cp\u003e\u003cstrong\u003eHonda Tank Fitting - 1\/4\" NPT Thread - 90HP+\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. This threaded fitting has a 1\/4\" male NPT thread. Also, use thread sealant on all threads, and clamps are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda male fitting\u003c\/li\u003e\n\u003cli\u003eDesigned for 90HP+ (Large Bore) \u003c\/li\u003e\n\u003cli\u003eMaterial Construction: Chrome-plated Brass\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part number: 8902-6\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886314164313,"sku":"98232","price":7.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/270929665.jpg?v=1764623490"},{"product_id":"attwood-johnson-evinrude-omc-male-tank-fitting-1-4-npt","title":"Attwood Johnson\/Evinrude\/OMC Male Tank Fitting - 1\/4\" NPT","description":"\u003cp\u003e\u003cstrong\u003eJohnson\/Evinrude\/OMC (Outboard Marine Corporation) Male Tank Fitting - 1\/4\" NPT\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1\/4\" male NPT thread and uses thread sealant on all threads. Clamps are not included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eJohnson, Evinrude, and OMC fitting\u003c\/li\u003e\n\u003cli\u003eQuick-connect ¼-inch male thread makes installation easy\u003c\/li\u003e\n\u003cli\u003eSolid machined brass for dependable performance, peace of mind\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e*Specifically mates to Attwood part numbers: 8889LP6 \u0026amp; 88FHE516-6\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886326026329,"sku":"98227","price":10.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/270929511.jpg?v=1764624043"},{"product_id":"attwood-3-8-hose-mender-in-line-fuel-splice-kit-w-ss-clamps","title":"Attwood 3\/8\" Hose Mender In-Line Fuel Splice Kit w\/SS Clamps","description":"\u003cp\u003e\u003cstrong\u003e3\/8\" Hose Mender In-Line Fuel Splice Kit with Stainless Steel Clamps\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eWhether it’s an emergency situation on the water or routine maintenance at the dock, this in-line fuel splice kit provides everything you need to repair 3\/8-inch lines. Machined brass fitting paired with 2 stainless steel hose \u003cspan style=\"background-color: initial;\"\u003eclamps. \u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEverything you need to mend a 3\/8-inch fuel line including 2 stainless steel hose clamps\u003c\/li\u003e\n\u003cli\u003eSolid machined brass with barbed ends\u003c\/li\u003e\n\u003cli\u003eA centered divider ensures you get the mender evenly and securely placed between both ends of the hose\u003c\/li\u003e\n\u003cli\u003eVery Versatile: Use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels\u003c\/li\u003e\n\u003c\/ul\u003e \u003c!--- cis2:m2lsl5xp ---\u003e","brand":"Attwood Marine","offers":[{"title":"Default Title","offer_id":42886347882585,"sku":"98330","price":5.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/270929445.jpg?v=1764624457"}],"url":"https:\/\/www.marinepartsonly.com\/collections\/motor-and-fuel-system.oembed?page=3","provider":"Marine Parts Only","version":"1.0","type":"link"}