{"product_id":"leland-maximum-inflation-re-arm-kit-d-38g-manual-3-8-inch-threads-840-series-inflator","title":"Leland Maximum Inflation Re-Arm Kit D 38G Manual 3\/8-Inch Threads, 840 Series Inflator","description":"\u003cp id=\"isPasted\"\u003e\u003cstrong\u003eRe-Arm Kit D 38G Manual 3\/8 Threads\u003cbr\u003e\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eRe-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 3\/8 threads, one Green Indicator Pin, and step-by-step instructions. Use with Manual Pull PFD devices with 840 Series Inflator. Do not use it with a self-inflating PFD. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor re-arming inflatable life vests\u003c\/li\u003e\n\u003cli\u003eUse with Manual Pull PFD devices with 840 Series Inflator\u003c\/li\u003e\n\u003cli\u003eDo not use with self-inflating PFD\u003c\/li\u003e\n\u003cli\u003eIncludes one 38-gram CO2 cylinder with 3\/8 threads, one Green Indicator Pin, and Instructions\u003c\/li\u003e\n\u003cli\u003eUL Marine Classified\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.\u003c\/p\u003e\u003cp\u003eWARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.\u003c\/p\u003e\u003cp\u003eWARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.\u003c\/p\u003e \u003c!--- cis2:m2lsl5xp ---\u003e\n\u003cp\u003e\u003cstrong\u003eLeland Maximum Inflation Re-Arm Kit D 38G Manual 3\/8-Inch Threads\u003c\/strong\u003e helps restore compatible inflatable life jackets for another season of use. Designed for manual-pull PFD devices with an 840 Series Inflator, this re-arming kit includes a 38-gram CO2 cylinder, green indicator pin, and step-by-step instructions. It is intended for users who need to replace the inflation components in a compatible inflatable life vest.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the kit with your inflatable life jacket owner’s manual and specified PFD model to confirm compatibility. This kit is not for use with self-inflating PFDs. Using the wrong re-arming kit can be dangerous. The included CO2 cylinder is for single use; once punctured to inflate the vest, it must be replaced. The kit is UL Marine Classified for applicable marine equipment use.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual inflatable PFD compatibility:\u003c\/strong\u003e Designed for manual-pull PFD devices with an 840 Series Inflator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete re-arming kit:\u003c\/strong\u003e Includes one 38-gram CO2 cylinder with 3\/8-inch threads, one green indicator pin, and instructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSingle-use CO2 cylinder:\u003c\/strong\u003e Replace the cylinder after it has been punctured to inflate the life jacket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel-specific use:\u003c\/strong\u003e Verify the kit matches the inflatable life jacket owner’s manual and specified PFD model before use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUL Marine Classified:\u003c\/strong\u003e Classified for applicable marine equipment requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eProduct Details:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Leland Maximum Inflation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e 840AMU-86121Z\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Type:\u003c\/strong\u003e Inflatable life jacket re-arm kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCO2 Cylinder:\u003c\/strong\u003e One 38-gram cylinder with 3\/8-inch threads\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded Components:\u003c\/strong\u003e Green indicator pin and step-by-step instructions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Use:\u003c\/strong\u003e Manual-pull PFD devices with 840 Series Inflator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot Compatible With:\u003c\/strong\u003e Self-inflating PFDs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSafety Information:\u003c\/strong\u003e Use only with specified PFD models. The gas cylinder is under pressure, and misuse can be dangerous. Do not incinerate, expose to sunlight, or store above 120°F (50°C). Do not throw into an open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWarranty:\u003c\/strong\u003e Leland warrants gas-filled cylinders to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the cylinder.\u003c\/p\u003e\u003cp\u003eConfirm the required kit before installation, then use the Leland Maximum Inflation Re-Arm Kit to properly service compatible manual inflatable PFD equipment.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCalifornia Proposition 65 Warning:\u003c\/strong\u003e [APPROVED PROP 65 WARNING REQUIRED]\u003c\/p\u003e\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eTruck Freight: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOversized: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"Leland Maximum Inflation","offers":[{"title":"Default Title","offer_id":44934312984665,"sku":"107792","price":32.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/107792XL.jpg?v=1789759802","url":"https:\/\/www.marinepartsonly.com\/products\/leland-maximum-inflation-re-arm-kit-d-38g-manual-3-8-inch-threads-840-series-inflator","provider":"Marine Parts Only","version":"1.0","type":"link"}