{"product_id":"maretron-mpower-12-channel-dc-load-module-nmea-2000-with-12-pigtail-adapter-cable-clmd12-r","title":"Maretron MPower 12-Channel DC Load Module NMEA 2000 with 12\" Pigtail Adapter Cable - CLMD12-R","description":"\u003cp\u003e\u003cstrong\u003eMPower 12 Channel DC Load Module NMEA 2K with 12 Pigtail Adapter Cable for J1  J2 Connectors\u003c\/strong\u003e\u003c\/p\u003e\u003cp id=\"isPasted\"\u003eDesigned for vessels of all sizes with smaller loads, the MPower CLMD12 is a compact 12-Channel DC Load Controller Module. Two of the 12 breakers handle a maximum of 12 amps, six handle a maximum of 10 amps, and four handle a maximum of 5 amps, with a total current capacity of 75 Amps. Additionally, circuits can be paralleled.\u003c\/p\u003e\u003cp\u003eIf a smaller circuit needs to be protected, each of the 12 breakers can be set to trip at lower current levels using the new Maretron N2KAnalyzer V3 software. In addition, the CLMD12 has inputs for up to 7 hard-wired switches that can be used to switch breaker states, or as inputs for other data, such as bilge alarms or hatch positions, etc.\u003c\/p\u003e\u003cp\u003eThe CLMD12 handles many DC load types such as lights, pumps, motors, and electronics. An added benefit of the CLMD12 is that it reports the current through each of the 12 breakers. This allows you to determine if loads are drawing too much or too little electrical current. This information can be used to report overcurrent faults and undercurrent conditions, such as burnt-out bulbs.\u003c\/p\u003e\u003cp\u003eFor manual control of the loads, an optional MPower 12-Channel Bypass Module (CBMD12) can be installed in conjunction with the CLMD12.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNMEA 2000 Interface\u003c\/li\u003e\n\u003cli\u003eIP67 Rated\u003c\/li\u003e\n\u003cli\u003eIgnition Protected\u003c\/li\u003e\n\u003cli\u003eOpto-isolated from NMEA 2000, eliminating potential ground loops\u003c\/li\u003e\n\u003cli\u003eTwelve (12) dimmable Electronic Circuit Breakers (ECBs) for On\/Off Control over NMEA 2000 network\u003c\/li\u003e\n\u003cli\u003e2 breakers capable of carrying up to 12 Amps\u003c\/li\u003e\n\u003cli\u003e6 breakers capable of carrying up to 10 Amps\u003c\/li\u003e\n\u003cli\u003e4 breakers capable of carrying up to 5 Amps\u003c\/li\u003e\n\u003cli\u003eIndividual breaker electrical current monitoring\u003c\/li\u003e\n\u003cli\u003eBreakers can have Power-Up states defined (ON, OFF, or PREVIOUS STATE)\u003c\/li\u003e\n\u003cli\u003eBreakers can be locked against inadvertent actuation.\u003c\/li\u003e\n\u003cli\u003eSeven (7) discrete inputs configurable as Active High or Active Low\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB overcurrent shutdown\u003c\/li\u003e\n\u003cli\u003eAutomatic ECB thermal shutdown (Overtemperature Protection)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRemote control of navigation lights\u003c\/li\u003e\n\u003cli\u003eRemote control of the boarding lights\u003c\/li\u003e\n\u003cli\u003eBurnt-out bulb alerts\u003c\/li\u003e\n\u003cli\u003eControl of area lights with dimming\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003eThis product may not be returned to the original point of purchase.  Please contact the manufacturer directly with any issues or concerns.\u003c\/strong\u003e \u003c!--- cis2:m2lsl5xp ---\u003e\n\u003cp\u003eThe Maretron MPower CLMD12-R is a compact and versatile 12-channel DC load controller designed for vessels of all sizes. This module allows for precise management of various electrical loads such as lights, pumps, motors, and electronics, providing reliable circuit protection and monitoring capabilities. With its NMEA 2000 interface, the CLMD12-R integrates seamlessly into marine networks, offering real-time current reporting for each of the 12 breakers, enabling proactive maintenance and fault detection.\u003c\/p\u003e\u003cp\u003eConstructed with durability in mind, the CLMD12-R is IP67 rated for water and dust resistance and is ignition protected, making it suitable for harsh marine environments. The module features twelve electronic circuit breakers (ECBs), with two capable of handling up to 12 amps, six up to 10 amps, and four up to 5 amps, for a total current capacity of 75 amps. These breakers can be configured to trip at lower currents through Maretron’s N2KAnalyzer V3 software, allowing customization for smaller circuits and sensitive loads. Additionally, each breaker can be set to Power-Up to a specific state (ON, OFF, or previous) and can be locked to prevent accidental activation.\u003c\/p\u003e\u003cp\u003eBeyond load management, the CLMD12-R offers seven hard-wired inputs that can be configured as active high or low, enabling integration with bilge alarms, hatch sensors, or other data sources. It also features automatic overcurrent and thermal shutdown protections to safeguard your electrical systems. For manual control, an optional MPower 12-Channel Bypass Module (CBMD12) can be added, providing additional ease of operation.\u003c\/p\u003e\u003cp\u003eThis module is ideal for remote control of navigation or cabin lighting, monitoring for burnt-out bulbs, and controlling area lighting with dimming capabilities. Its comprehensive features, including individual current monitoring and configurable breaker settings, make it a valuable addition to any marine electrical system, enhancing safety, efficiency, and fault detection while ensuring seamless network integration.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eNMEA 2000 interface for seamless marine network integration\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIP67 rated for water and dust resistance\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIgnition protected for safety in marine environments\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOpto-isolated from NMEA 2000 to prevent ground loop issues\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwelve electronically controlled circuit breakers (ECBs) for on\/off control\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eTwo breakers rated for up to 12 amps, six for 10 amps, and four for 5 amps, with a total capacity of 75 amps\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eIndividual current monitoring for each breaker for load management\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eConfigurable breaker trip current levels via Maretron N2KAnalyzer V3 software\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBreaker power-up states can be predefined (ON, OFF, or previous)\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eBreakers can be locked to prevent accidental actuation\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eSeven configurable hard-wired inputs for switches, bilge alarms, or hatch sensors\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eAutomatic overcurrent and thermal shutdown protection\u003c\/li\u003e\u003c\/ul\u003e\u003cul\u003e\u003cli\u003eOptional Bypass Module available for manual load control\u003c\/li\u003e\u003c\/ul\u003e\u003cstyle\u003etable.productattributes, .productattributes td { border-bottom: 1px solid #ddd; border-collapse: collapse; padding: 2px; text-align: left; }\u003c\/style\u003e\n\u003ctable class=\"productattributes\"\u003e\n\u003cthead\u003e\u003ctr\u003e\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\u003ctd\u003eTruck Freight: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003ctr\u003e\u003ctd\u003eOversized: No\u003c\/td\u003e\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cbr\u003e","brand":"Maretron","offers":[{"title":"Default Title","offer_id":44253671194713,"sku":"107976","price":683.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0623\/1818\/2489\/files\/107976XL.jpg?v=1785355099","url":"https:\/\/www.marinepartsonly.com\/products\/maretron-mpower-12-channel-dc-load-module-nmea-2000-with-12-pigtail-adapter-cable-clmd12-r","provider":"Marine Parts Only","version":"1.0","type":"link"}