Airmar MMC-11R-LDB 11-Pin Low-Frequency CHIRP Mix & Match Cable for Raymarine

11-Pin Low-Frequency Mix Match Cable for Raymarine

Some CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.

The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the equipment location. The short adapter cable connects to the transducer cable at one end and to the equipment at the other end.

Both parts are needed for an installation. If the user changes equipment brand at some later time, the transducer and its attached cable can be left in place and only the adapter cable needs to be replaced.

Note that CHIRP Mix and Match cablescannotbe used with conventional 50/200kHz transducers.

The same cables are used for all CHIRP transducers irrespective of their power rating.

Airmar MMC-11R-LDB 11-Pin Low-Frequency CHIRP Mix & Match Cable for Raymarine provides the brand-specific equipment connection needed for compatible Airmar CHIRP Mix & Match transducer installations. Designed for Raymarine equipment, this adapter cable connects the transducer’s permanently attached cable to the onboard electronics, helping support a clean, adaptable installation.

CHIRP Mix & Match transducers use a common base transducer with a permanently attached 9-meter cable and a short, interchangeable adapter cable specific to the equipment brand. The attached transducer cable runs through the boat to the equipment location, while the Airmar MMC-11R-LDB adapter connects between the transducer cable and Raymarine equipment. Both cable sections are required for a complete installation.

This interchangeable design can simplify future electronics changes. If the equipment brand is changed later, the transducer and its attached cable can remain installed while only the brand-specific adapter cable is replaced. The same CHIRP Mix & Match cables are used across CHIRP transducers regardless of power rating. This cable is intended for CHIRP Mix & Match transducers and cannot be used with conventional 50/200 kHz transducers.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Key Features

• Raymarine compatibility: Provides the equipment-side connection for compatible Raymarine CHIRP Mix & Match transducer installations.
• 11-pin configuration: Uses an 11-pin connector configuration for the specified low-frequency cable application.
• Interchangeable adapter design: Allows the brand-specific cable to be replaced if the boat’s electronics brand changes.
• CHIRP Mix & Match use: Designed for compatible CHIRP transducers, regardless of power rating.
• Installation-specific cable: Connects the attached transducer cable to the onboard equipment location.

Product Details

• Brand: Airmar
• Part number: MMC-11R-LDB
• Product type: 11-pin low-frequency CHIRP Mix & Match adapter cable
• Equipment compatibility: Raymarine
• Use: Compatible CHIRP Mix & Match transducer installations
• Not compatible with: Conventional 50/200 kHz transducers

Choose the Airmar MMC-11R-LDB when you need the correct Raymarine adapter cable for a compatible CHIRP Mix & Match transducer system.

Product summary

Airmar MMC-11R-LDB 11-pin low-frequency CHIRP Mix & Match cable for Raymarine equipment and compatible transducer installations.