Commodore CM-A31-1100B 1100 GPH Non-Automatic Bilge Pump, 12V

1100 GPH Non-Automatic Bilge Pump - 12V

The 1100 GPH Non-Automatic Bilge Pump delivers powerful and efficient water evacuation for marine applications. Designed for flexibility, this pump requires activation through a panel or separate float switch, giving boat owners full control over the operation. With a flow rate of 1100 GPH, it ensures rapid water removal to keep your bilge dry and your vessel safe.

Built to last, this pump features anti-airlock protection, a robust stainless-steel motor shaft, and exclusive moisture-tight seals, making it ideal for harsh marine conditions. Maintenance is simplified with the quick-connect motor and base design, allowing the pump to be replaced in seconds without disconnecting the plumbing. Whether youre replacing or upgrading, the 1100 GPH Bilge Pump sets the standard for reliable, user-friendly performance.

Features:

• High-Performance Water Evacuation: With a flow rate of 1100 GPH, this pump rapidly removes bilge water, keeping your vessel dry and ready for safe operation in all conditions.
• Non-Automatic Design: This pump requires activation through a separate float or panel switch, giving you complete manual control over the operation for enhanced reliability.
• Quick-Connect Wiring: Features threaded outlets and quick-connect wiring for seamless installation and maintenance. Replace the motor or base in seconds, not hours! Allows to user to switch the pump out in seconds between the quick disconnect base, quick disconnect wiring, and quick disconnect plumbing.
• Advanced Anti-Airlock Protection: The vented impeller design prevents airlocks, ensuring uninterrupted water flow for consistent performance in challenging conditions.
• Dual-Size Outlet Compatibility: Includes both 1-inch and 1-1/8 inch straight fittings, along with a 90-degree 1-1/8 inch fitting for flexible and easy installation in various setups.
• Durable Marine-Grade Construction: Features a stainless-steel motor shaft, marine-grade silicon-blocked wiring, and exclusive moisture-tight seals to resist corrosion and ensure long-lasting operation.
• Built-In Check Valve: The integrated check valve prevents water backflow, maintaining a dry bilge and increasing pump efficiency for optimal operation.
• Meets Industry Standards: Fully submersible and ignition protected, meeting or exceeding ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards for marine safety and reliability.
• Compact and Lightweight: Measuring 4.83 x 2.99 x 4.72 inches and weighing just 1.03 lbs, this compact pump is easy to install even in tight bilge spaces.
• 4-Year Warranty: Backed by Commodores 4-year warranty, ensuring reliable performance and peace of mind for boat owners.

Specifications:

• Outlet: 3/4 and 1-1/8
• Voltage: 12V
• Gallons per hour: 1100 GPH (Gallons Per Hour)
• Outlet Diameter: 1-inch (25mm) 1-1/8 inch (29mm)
• Current: 40A
• Head: 12 feet (4 meters)
• Unit Weight: 1.03 lbs (0.47 kg)

Included Components:

• Dual-size straight fitting (3/4 inch and 1-1/8 inch)
• Optional 90-degree angled fitting (1-1/8 inch)
• Quick-connect wiring for hassle-free setup

Commodore CM-A31-1100B 1100 GPH Non-Automatic Bilge Pump, 12V

The Commodore CM-A31-1100B bilge pump provides powerful water evacuation for boats and other marine applications. Delivering up to 1,100 gallons per hour, this 12-volt non-automatic bilge pump helps remove water efficiently while giving boat owners direct control through a separate float switch or panel switch.

Designed for demanding marine conditions, the pump features anti-airlock protection, a stainless-steel motor shaft, moisture-tight seals, marine-grade silicon-blocked wiring, and a built-in check valve. Its quick-connect motor and base design simplifies service, allowing the motor or base to be replaced without disconnecting the plumbing. Dual-size fittings and an optional angled fitting support flexible installation in a variety of bilge setups.

Key Features:

• 1,100 GPH Water Evacuation: Quickly removes bilge water to help maintain a drier vessel.
• Non-Automatic Operation: Requires activation through a separate float switch or panel switch for direct manual control.
• Quick-Connect Design: Quick-connect wiring, plumbing, motor, and base simplify installation and replacement.
• Anti-Airlock Protection: Vented impeller design supports consistent water flow by helping prevent airlocks.
• Marine-Grade Construction: Stainless-steel motor shaft, silicon-blocked wiring, and moisture-tight seals support reliable marine use.
• Flexible Outlet Options: Includes dual-size straight fittings and an optional 90-degree fitting for adaptable installation.

Product Details:

• Brand: Commodore
• Part Number: CM-A31-1100B
• Product Type: Non-automatic bilge pump
• Voltage: 12V
• Flow Rate: 1,100 gallons per hour
• Outlet Sizes: 1 inch and 1-1/8 inch; specifications also identify 3/4-inch and 1-1/8-inch outlet options
• Head: 12 feet
• Current: 40A
• Included Components: Dual-size straight fitting, optional 90-degree 1-1/8-inch angled fitting, and quick-connect wiring
• Construction and Protection: Fully submersible and ignition protected; meets or exceeds ISO 8846, ISO 8849, SAE J1171, ABYC C-1500, and ABYC H-22 standards
• Warranty: 4-year Commodore warranty

Choose the Commodore CM-A31-1100B for efficient, service-friendly bilge water removal and dependable 12-volt marine performance.

SEO Meta Description: Commodore 1100 GPH 12V non-automatic bilge pump with quick-connect service, anti-airlock protection, flexible fittings, and durable marine construction.