Lectrotab Smart Tab SX Trim Tabs for 13-15 Foot Boats with 30-40 HP - Black

Smart Tab SX Trim Tabs for 13-15 Boat with 30 - 40HP - Black

If these trim tabs dont provide you with an outstanding performance increase, contact us within 30 days of your purchase.

Why buy a manually adjusting trim tab set when you can get the automatic trim tabs that will self-adjust and perform better for less money

The SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion-free benefits of molded composite materials. Assembly can be completed in seconds, and the installation in a few minutes. The only tools required are a drill with a 3/16 bit and a Phillips screwdriver. SMART TABS SX provide unequaled performance and durability with no maintenance in fresh or salt water. The system can be specifically tuned to maximize the performance of any power boat, and TRACKING RIBS have been added to improve handling at higher speeds.

Our breakthrough technology in trim tabs is completely automatic, requiring no operator adjustment while underway. Nauticus trim tabs self-adjust according to how you load and maneuver your boat.

The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.

• Reduce the minimum planning speed by up to 33%
• Faster Acceleration
• Increase top speed
• Provide a level, more comfortable ride at lower speeds
• Improve fuel economy, handling, and safety

NO HYDRAULICS - NO ELECTRIC SWITCHES

Nauticus trim tabs are completely automatic, requiring no operator adjustment while underway.

The nitrogen Gas Actuator provides LIFT at the stern of the boat by holding the trim plate down during acceleration. The amount of LIFT is determined by the actuator load rating and the trim plate adjustment, which is done at the time of installation.

SPEED REGULATION

Nauticus trim tabs start in a downward angel to maximize lift at slow speeds. As the boat accelerates, the water pushes up on the trim plates providing lift to the stern which minimizes bow rise, and allows the boat to plane quickly.

Once the water pressure exceeds the actuator load rating (maximum lift) the trim plates move up to a horizontal position eliminating any drag.

BOAT STABILIZERS

Even when cruising SMART TABS continue to work like shock absorbers. The constant adjustment to sea conditions allow SMART TABS to provide remarkable stability in turns, while crossing waves, while cruising, and while running at maximum speeds. No more sliding, porpoising, or chine walking.

ONE OF A KIND

The unique system is the only one of its kind in the industry. The internal valve system is truly smart in its design of controlling you boats performance.

It will reduce the minimum planning speed by 33%

Provide a level, more comfortable ride at lower speeds

Improve economy, handling and safety

As the boat speed increases, the water pressure also increases. Once the water pressure exceeds the Actuator load rating (maximum LIFT period) the trim plates begin to move upward until they are horizontal with the bottom of the boat.

The internal valve system dampens the trim plate movement which eliminates any instant reaction to minor water pressure variances. Nauticus trim tabs provide smooth and undetectable reaction to boat speed creating a level, more comfortable ride at lower speeds.

INSTALLATION IS SIMPLE

With an electric drill, small drill bit, a phillips screwdriver, and two wrenches, just about anyone can install SMART TABS in less than an hour. Professional installers should be able to install SMART TABS in 30 minutes or less.

*All mounting hardware, instructions, and templates are included.

*SMART TABS require NO THROUGH HULL DRILLING

Enhance your boating experience with the Lectrotab Smart Tab SX Trim Tabs, designed specifically for 13-15 foot boats equipped with 30-40 HP engines. Crafted from durable, corrosion-resistant molded composite materials, these fully automatic trim tabs deliver superior performance with minimal maintenance, whether in fresh or saltwater environments. The quick and straightforward installation requires only basic tools—a drill with a 3/16 inch bit and a Phillips screwdriver—allowing you to upgrade your boat’s handling and efficiency in less than an hour.

These trim tabs incorporate advanced self-adjusting technology that automatically responds to changes in boat load and maneuvering, providing optimal lift and stability without operator input during operation. The nitrogen gas actuator generates lift at the stern during acceleration, helping to reduce planning speeds by up to 33%, improve acceleration, and increase top speeds. This results in a smoother ride, enhanced handling, and better fuel economy. The system's unique internal valve dampens reaction to minor water pressure fluctuations, ensuring seamless, undetectable adjustments for a level, comfortable ride at all speeds.

Designed with tracking ribs, the Smart Tab SX enhances handling at higher speeds, making turns more responsive and crossing waves more stable. The system works as a set of shock absorbers, constantly adapting to sea conditions to prevent sliding, porpoising, and chine walking, thus improving safety and comfort. The absence of hydraulics and electric switches simplifies maintenance and reduces potential points of failure, delivering reliable, automatic performance.

When installed, the trim tabs are initially set to maximize lift at low speeds, then automatically adjust as water pressure increases, moving toward a horizontal position to reduce drag at higher speeds. This seamless transition optimizes boat performance across all operating conditions. All necessary hardware, instructions, and templates are included for easy installation, making it suitable for DIY enthusiasts and professional installers alike.

Upgrade your boat with the Lectrotab Smart Tab SX Trim Tabs for a safer, more efficient, and enjoyable boating experience, backed by a manufacturer’s satisfaction guarantee. Contact us within 30 days if you are not fully satisfied with the performance improvements offered by these innovative trim tabs.

Features:

• Fully automatic self-adjusting design for optimal lift and stability

• Constructed from corrosion-resistant molded composite materials for durability

• Quick installation with basic tools—no through-hull drilling required

• Nitrogen gas actuator provides lift during acceleration to reduce planning speed

• Tracks high-speed handling with added tracking ribs for enhanced responsiveness

• Dampened internal valve system for smooth, undetectable adjustments

• Improves acceleration, top speed, and fuel efficiency

• Provides a more level and comfortable ride at all speeds

• Reduces boat porpoising, chine walking, and sliding for safer handling