Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit I 24G Auto Bayonet
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with a Black Bayonet, Yellow Bobbin/Water Sensing Element, and Instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices with Black Bayonet
- Includes one 24 gram CO2 cylinder with Black Bayonet, Yellow Bobbin/Water Sensing Element and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Leland Maximum Inflation 24-Gram Auto Bayonet Re-Arm Kit helps restore compatible inflatable life jackets and personal flotation devices for another season of use. Designed for Auto/Manual Pull PFD devices with a Black Bayonet, this kit provides the key replacement components needed to re-arm a compatible inflatable life vest. Always compare the kit with your PFD owner's manual before installation, as using the wrong re-arm kit can be dangerous.
The kit includes one 24-gram CO2 cylinder with Black Bayonet, a Yellow Bobbin/Water Sensing Element, and installation instructions. It is intended for specified inflatable PFD models and is UL Marine Classified. The CO2 cylinder is a single-use component; once punctured to inflate the vest, it must be replaced. Follow the manufacturer's instructions and verify compatibility before use.
Key Features:
-
Inflatable PFD re-arm kit: Provides replacement components for compatible inflatable life vests.
-
Auto/Manual Pull compatibility: Designed for PFD devices using a Black Bayonet.
-
Complete re-arm components: Includes one 24-gram CO2 cylinder, Black Bayonet, Yellow Bobbin/Water Sensing Element, and instructions.
-
UL Marine Classified: Classified for applicable marine use.
-
Single-use CO2 cylinder: Replace the cylinder after it has been punctured to inflate the vest.
Product Details:
-
Brand: Leland Maximum Inflation
-
Part number: V86000-84204Z
-
Product type: Inflatable PFD re-arm kit
-
CO2 cylinder capacity: 24 grams
-
Bayonet: Black
-
Water sensing element: Yellow Bobbin
-
Intended use: Auto/Manual Pull PFD devices with Black Bayonet
-
Quantity: One re-arm kit
Safety and storage: Use only with specified PFD models. The gas cylinder is under pressure, and misuse can be dangerous. Do not incinerate, expose to sunlight, or store above 120°F (50°C). Do not throw into an open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty, and discharge and dispose of corroded or rusty cylinders.
Choose the Leland Maximum Inflation Re-Arm Kit I to maintain compatible inflatable life jackets with the correct replacement components and instructions.
Warranty:
Gas-filled cylinders are warranted to be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane-filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the same cylinder.
|
| Truck Freight: No |
| Oversized: No |
