Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit D 38G Manual 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 3/8 threads, one Green Indicator Pin, and step-by-step instructions. Use with Manual Pull PFD devices with 840 Series Inflator. Do not use it with a self-inflating PFD. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices with 840 Series Inflator
- Do not use with self-inflating PFD
- Includes one 38-gram CO2 cylinder with 3/8 threads, one Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Leland Maximum Inflation Re-Arm Kit D 38G Manual 3/8-Inch Threads helps restore compatible inflatable life jackets for another season of use. Designed for manual-pull PFD devices with an 840 Series Inflator, this re-arming kit includes a 38-gram CO2 cylinder, green indicator pin, and step-by-step instructions. It is intended for users who need to replace the inflation components in a compatible inflatable life vest.
Before installation, compare the kit with your inflatable life jacket owner’s manual and specified PFD model to confirm compatibility. This kit is not for use with self-inflating PFDs. Using the wrong re-arming kit can be dangerous. The included CO2 cylinder is for single use; once punctured to inflate the vest, it must be replaced. The kit is UL Marine Classified for applicable marine equipment use.
Key Features:
-
Manual inflatable PFD compatibility: Designed for manual-pull PFD devices with an 840 Series Inflator.
-
Complete re-arming kit: Includes one 38-gram CO2 cylinder with 3/8-inch threads, one green indicator pin, and instructions.
-
Single-use CO2 cylinder: Replace the cylinder after it has been punctured to inflate the life jacket.
-
Model-specific use: Verify the kit matches the inflatable life jacket owner’s manual and specified PFD model before use.
-
UL Marine Classified: Classified for applicable marine equipment requirements.
Product Details:
-
Brand: Leland Maximum Inflation
-
Part Number: 840AMU-86121Z
-
Product Type: Inflatable life jacket re-arm kit
-
CO2 Cylinder: One 38-gram cylinder with 3/8-inch threads
-
Included Components: Green indicator pin and step-by-step instructions
-
Compatible Use: Manual-pull PFD devices with 840 Series Inflator
-
Not Compatible With: Self-inflating PFDs
Safety Information: Use only with specified PFD models. The gas cylinder is under pressure, and misuse can be dangerous. Do not incinerate, expose to sunlight, or store above 120°F (50°C). Do not throw into an open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
Warranty: Leland warrants gas-filled cylinders to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the cylinder.
Confirm the required kit before installation, then use the Leland Maximum Inflation Re-Arm Kit to properly service compatible manual inflatable PFD equipment.
California Proposition 65 Warning: [APPROVED PROP 65 WARNING REQUIRED]
|
| Truck Freight: No |
| Oversized: No |
