Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit F 38G Auto 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 3/8 threads, one green pin, a bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices with V85000 Series Inflator
- Includes one 38-gram CO2 cylinder with 3/8 threads, one Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Restore your compatible inflatable life jacket for another season of use with the Leland Maximum Inflation Re-Arm Kit F. Designed for Auto/Manual Pull PFD devices with a V85000 Series Inflator, this replacement re-arming kit includes the essential components needed to service a compatible inflatable life vest. Always compare the kit with your PFD owner's manual before installation, as using the wrong re-arming kit can be dangerous.
The kit includes one 38-gram CO2 cylinder with 3/8-inch threads, one green indicator pin, one yellow bobbin/water-sensing element, and step-by-step re-arming instructions. The CO2 cylinder is intended for one-time use only; once punctured to inflate the vest, it must be replaced. The cylinder is UL Marine Classified and is intended only for use with specified PFD models.
Key Features:
-
Compatible application: For re-arming compatible inflatable life vests and PFDs.
-
Inflator compatibility: Designed for Auto/Manual Pull PFD devices with a V85000 Series Inflator.
-
Complete re-arm kit: Includes a 38-gram CO2 cylinder with 3/8-inch threads, green indicator pin, yellow bobbin/water-sensing element, and instructions.
-
Marine classification: UL Marine Classified for the specified application.
-
Single-use cylinder: The CO2 cartridge must be replaced after it is punctured to inflate the vest.
Product Details:
-
Brand: Leland Maximum Inflation
-
Part number: V85000-86121Z
-
Product type: Inflatable life jacket and PFD re-arm kit
-
CO2 cylinder capacity: 38 grams
-
Thread size: 3/8 inch
-
Inflator type: V85000 Series Inflator
-
Use: Auto/Manual Pull PFD devices with specified compatibility
-
Included components: One CO2 cylinder, one green indicator pin, one yellow bobbin/water-sensing element, and re-arming instructions
-
Safety: Do not incinerate, expose to sunlight, or store above 120°F. Keep away from children, and dispose of cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
-
Warranty: Gas-filled cylinders are warranted against defects and leakage for up to three years, depending on storage conditions. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders, and credit is not permitted for punctured cylinders unless a faulty Leland valve is returned with the cylinder.
Choose the Leland Maximum Inflation V85000-86121Z Re-Arm Kit F to properly service a compatible inflatable life jacket or PFD with the specified V85000 Series Inflator.
California Proposition 65 Warning: [APPROVED PROP 65 WARNING REQUIRED]
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not throw into open fire or dump at sea.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
SEO Meta Description:
Re-arm compatible inflatable life jackets with the Leland Maximum Inflation 38-gram CO2 kit for V85000 Series Auto/Manual Pull PFD inflators.
|
| Truck Freight: No |
| Oversized: No |
