Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit G 25G Manual 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 25-gram CO2 cylinder with 3/8 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices
- Do not use with self-inflating PFD
- Includes one 25-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Leland Maximum Inflation Re-Arm Kit G 25G Manual 3/8-Inch Threads helps restore compatible manual inflatable life jackets and PFDs for another season of use. Designed for manual pull PFD devices, this re-arming kit includes a 25-gram CO2 cylinder with 3/8-inch threads, a green indicator pin, and step-by-step instructions to support proper replacement.
Before installation, check your inflatable life jacket owner’s manual and compare the specified re-arming kit to confirm compatibility. This kit is intended for manual inflatable PFDs and must not be used with self-inflating PFDs. Using an incorrect re-arming kit can be dangerous, so match the cylinder and components to the specified PFD model.
The CO2 cylinder is designed for one-time use. Once the cartridge has been punctured to inflate the vest, it must be replaced. The cylinder is UL Marine Classified and should be handled, stored, and disposed of according to the included safety instructions.
Key Features:
- For re-arming compatible inflatable life vests and manual inflatable PFDs
- Includes one 25-gram CO2 cylinder with 3/8-inch threads
- Includes a green indicator pin and step-by-step re-arming instructions
- Not for use with self-inflating PFDs
- UL Marine Classified
- Single-use CO2 cylinder must be replaced after activation
Product Details:
- Brand: Leland Maximum Inflation
- Part Number: 840AMU-84121Z
- Kit Type: G 25G manual re-arm kit
- Thread Size: 3/8 inch
- CO2 Cylinder Capacity: 25 grams
- Included Components: One CO2 cylinder, green indicator pin, and instructions
- Intended Use: Compatible manual pull PFD devices; verify the specified PFD model before use
Safety and Storage: This gas cylinder is under pressure, and misuse can be dangerous. Do not incinerate, expose to sunlight, or store above 120°F. Do not throw into an open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty, and discharge and dispose of corroded or rusty cylinders.
Warranty: Leland warrants gas-filled cylinders to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the cylinder.
Choose the Leland Maximum Inflation Re-Arm Kit G 25G to maintain a compatible manual inflatable PFD with the correct replacement components and instructions.
SEO Meta Description: Restore compatible manual inflatable PFDs with the Leland 25-gram CO2 re-arm kit, featuring 3/8-inch threads, green pin, and instructions.
|
| Truck Freight: No |
| Oversized: No |
