Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit M 16G Manual 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 16-gram CO2 cylinder with 3/8 threads, a green pin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Manual Pull PFD devices
- Do not use with self-inflating PFD
- Includes one 16-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Leland Maximum Inflation Re-Arm Kit M 16G Manual 3/8-Inch Threads helps restore compatible inflatable life jackets and manual-pull personal flotation devices for another season of use. This replacement re-arming kit is designed for specified PFD models that use a 16-gram CO2 cylinder with 3/8-inch threads, providing the essential components needed after inflation or activation.
The kit includes one 16-gram CO2 cylinder, a green indicator pin, and step-by-step re-arming instructions. Before installation, check the owner's manual for your inflatable life jacket or PFD to confirm that the re-arming kit matches the device. Using an incorrect kit may be dangerous. This kit is intended for manual pull PFD devices and must not be used with self-inflating PFDs.
Key Features:
-
Manual PFD re-arming: Intended for compatible inflatable life vests and manual-pull personal flotation devices.
-
16-gram CO2 cylinder: Includes one pressurized CO2 cylinder with 3/8-inch threads for specified PFD models.
-
Green indicator pin: Provides the included replacement indicator component for compatible re-arming systems.
-
Step-by-step instructions: Includes instructions to support proper re-arming according to the PFD manufacturer’s requirements.
-
UL Marine Classified: Classified for applicable marine use requirements.
Product Details:
-
Brand: Leland Maximum Inflation
-
Model: 840AMU-82123Z
-
Kit type: Manual inflatable PFD re-arm kit
-
CO2 cylinder: One 16-gram cylinder
-
Thread size: 3/8 inch
-
Included components: Green indicator pin and re-arming instructions
-
Use limitation: For specified PFD models; do not use with self-inflating PFDs
-
Replacement requirement: Single-use cylinder must be replaced after it is punctured to inflate the vest
Safety Information: Use only with specified PFD models. The gas cylinder is under pressure, so misuse can be dangerous. Do not incinerate, expose to sunlight, or store above 120°F (50°C). Do not throw into an open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
Warranty: Gas-filled cylinders are warranted to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N2O, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the same shipment.
Choose the Leland Maximum Inflation Re-Arm Kit M 16G Manual 3/8-Inch Threads when your compatible inflatable PFD requires a matching replacement cylinder and re-arming components.
|
| Truck Freight: No |
| Oversized: No |
