Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit Q 33G Auto 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 33-gram CO2 cylinder with 1/2 threads, a green indicator clip, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices
- Includes one 33-gram CO2 cylinder with 1/2 threads, one Yellow Bobbin/Water Sensing Element, one Green Indicator Clip, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Keep your inflatable life jacket ready for another season with the Leland Maximum Inflation Re-Arm Kit Q 33G Auto 1/2-Inch Threads. Designed for compatible inflatable life vests and Auto/Manual Pull PFD devices, this replacement kit provides the essential components needed to re-arm your PFD after deployment. Always verify the kit against your inflatable life jacket owner’s manual and specified PFD model before use, as using the wrong re-arming kit can be dangerous.
The kit includes one 33-gram CO2 cylinder with 1/2-inch threads, one yellow bobbin/water sensing element, one green indicator clip, and step-by-step re-arming instructions. The green indicator clip helps confirm the re-arming mechanism is properly set according to the applicable PFD instructions. The CO2 cylinder is intended for one-time use; once punctured to inflate the vest, it must be replaced. This kit is UL Marine Classified.
Key Features:
-
Replacement re-arm kit: Helps restore compatible inflatable life vests after inflation.
-
Auto/Manual Pull PFD compatibility: Intended for use with specified Auto/Manual Pull PFD devices.
-
Complete kit contents: Includes a 33-gram CO2 cylinder with 1/2-inch threads, yellow bobbin/water sensing element, green indicator clip, and instructions.
-
One-time-use CO2 cylinder: Replace the cylinder after it has been punctured to inflate the vest.
-
Marine classification: UL Marine Classified.
Product Details:
-
Brand: Leland Maximum Inflation
-
Part Number: V90000-85202Z
-
Product type: Inflatable life vest re-arm kit
-
CO2 cylinder: 33 grams with 1/2-inch threads
-
Quantity: One re-arm kit
-
Included components: One CO2 cylinder, one yellow bobbin/water sensing element, one green indicator clip, and re-arming instructions
-
Use: Compatible specified Auto/Manual Pull PFD devices; verify fit with the PFD owner’s manual
Safety and Storage: The gas cylinder is under pressure and misuse can be dangerous. Do not incinerate, expose to sunlight, or store above 120°F (50°C). Do not throw into an open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty, and discharge and dispose of corroded or rusty cylinders.
Warranty: Gas-filled cylinders are warranted to be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the cylinder.
Choose the Leland Maximum Inflation Re-Arm Kit V90000-85202Z when your compatible inflatable PFD needs the specified 33-gram CO2 re-arming components.
California Proposition 65 Warning: [APPROVED PROP 65 WARNING REQUIRED]
|
| Truck Freight: No |
| Oversized: No |
