Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit R 25G Auto 3/8 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 25-gram CO2 cylinder with 3/8 threads, a green pin, a bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices
- Includes one 25-gram CO2 cylinder with 3/8 threads, Green Indicator Pin, and Yellow Bobbin/Water Sensing Element and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Re-Arm Kit R 25G Auto 3/8-Inch Threads
Keep your compatible inflatable life jacket ready for another season with the Leland Maximum Inflation Re-Arm Kit, model V85000-84121Z. Designed for inflatable life vests with Auto/Manual Pull PFD devices, this replacement kit provides the specified components needed to re-arm the vest after inflation. Always compare the kit with your PFD owner’s manual before installation, because using an incorrect re-arming kit can be dangerous.
The kit includes one 25-gram CO2 cylinder with 3/8-inch threads, a green indicator pin, a yellow bobbin/water-sensing element, and step-by-step re-arming instructions. The single-use CO2 cylinder must be replaced after it has been punctured to inflate the vest. Follow the manufacturer’s instructions and use this kit only with specified PFD models.
Key Features:
- For re-arming compatible inflatable life vests after inflation
- Designed for Auto/Manual Pull PFD devices
- Includes one 25-gram CO2 cylinder with 3/8-inch threads
- Includes green indicator pin and yellow bobbin/water-sensing element
- Step-by-step re-arming instructions included
- UL Marine Classified
Product Details:
- Brand: Leland Maximum Inflation
- Model: V85000-84121Z
- Kit type: Inflatable life jacket re-arm kit
- CO2 cylinder capacity: 25 grams
- Thread size: 3/8 inch
- Compatible device type: Auto/Manual Pull PFD devices; verify the specified PFD model before use
- Quantity: One re-arm kit
- Use: Single-use CO2 cylinder; replace after inflation
Safety and Storage: The gas cylinder is under pressure. Do not incinerate, expose it to sunlight, or store it above 120°F. Do not throw it into an open fire or dump it at sea. Keep away from children. Dispose of cylinders only when empty, and discharge and dispose of corroded or rusty cylinders.
Choose the Leland Maximum Inflation Re-Arm Kit V85000-84121Z to maintain the specified re-arming components for your compatible inflatable PFD.
Warranty: Gas-filled cylinders are warranted to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the same cylinder.
California Proposition 65 Warning: [APPROVED PROP 65 WARNING REQUIRED]
|
| Truck Freight: No |
| Oversized: No |
