Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit S 38G Auto 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 1/2 threads, green pin, bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices
- Includes one 38-gram CO2 cylinder with 1/2 threads, Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Leland Maximum Inflation Re-Arm Kit S 38G Auto 1/2-Inch Threads helps restore compatible inflatable life jackets and personal flotation devices for another season of use. Designed for Auto/Manual Pull PFD devices, this re-arming kit includes a 38-gram CO2 cylinder with 1/2-inch threads, a green indicator pin, a yellow bobbin/water-sensing element, and step-by-step instructions.
Before installation, compare the Leland Maximum Inflation Re-Arm Kit model and components with your inflatable life jacket owner's manual and the existing re-arming system. Use only with specified PFD models, as selecting the wrong re-arm kit can be dangerous. The CO2 cylinder is intended for one-time use; once punctured to inflate the vest, it must be replaced.
Key Features:
-
Inflatable PFD Re-Arming: Provides the components needed to re-arm compatible inflatable life vests.
-
Auto/Manual Pull Compatibility: Designed for use with Auto/Manual Pull PFD devices when specified by the PFD manufacturer.
-
Complete Re-Arm Components: Includes one 38-gram CO2 cylinder with 1/2-inch threads, green indicator pin, yellow bobbin/water-sensing element, and instructions.
-
UL Marine Classified: Classified for marine use according to the provided product information.
-
Single-Use Cylinder: Replace the CO2 cylinder after it has been punctured to inflate the vest.
Product Details:
-
Brand: Leland Maximum Inflation
-
Model: V85000-86202Z
-
Product Type: Inflatable PFD re-arm kit
-
CO2 Cylinder: 38 grams
-
Thread Type: 1/2-inch threads
-
Included Components: CO2 cylinder, green indicator pin, yellow bobbin/water-sensing element, and re-arming instructions
-
Intended Use: Compatible Auto/Manual Pull inflatable life jackets and PFD devices, as specified by the PFD owner's manual
Safety and Storage: The gas cylinder is under pressure. Do not incinerate, expose it to the sun, or store it above 120°F (50°C). Do not throw it into an open fire or dump it at sea. Keep away from children. Dispose of gas cylinders only when empty, and discharge and dispose of corroded or rusty cylinders.
Warranty: Gas-filled cylinders are warranted to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the same shipment.
Choose the Leland Maximum Inflation V85000-86202Z Re-Arm Kit to maintain compatible inflatable PFD equipment with the specified replacement components and instructions.
California Proposition 65 Warning: [APPROVED PROP 65 WARNING REQUIRED]
|
| Truck Freight: No |
| Oversized: No |
