Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit S2 38G Auto 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 38-gram CO2 cylinder with 1/2 threads, yellow Bobbin/Water Sensing Element, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices
- Includes one 38-gram CO2 cylinder with 1/2 threads, Yellow Bobbin/Water Sensing Element, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Restore your compatible inflatable life jacket or life vest for another season with the Leland Maximum Inflation Re-Arm Kit S2 38G Auto 1/2 Threads. Designed for Auto/Manual Pull PFD devices, this re-arming kit includes the essential components needed to replace a used inflation cylinder and water-sensing element. Before installation, check your inflatable PFD owner’s manual and confirm that this kit matches the specified PFD model.
The kit includes one 38-gram CO2 cylinder with 1/2 threads, a yellow Bobbin/Water Sensing Element, and step-by-step re-arming instructions. These components support the re-arming of compatible inflatable life vests after deployment or when the existing activation components require replacement. Using the correct re-arm kit is important, as using an incorrect cylinder or bobbin can be dangerous.
Key Features:
- For re-arming compatible inflatable life vests and inflatable PFDs
- Designed for Auto/Manual Pull PFD devices
- Includes one 38-gram CO2 cylinder with 1/2 threads
- Includes yellow Bobbin/Water Sensing Element and step-by-step instructions
- UL Marine Classified
Product Details:
- Brand: Leland Maximum Inflation
- Part Number: V95000-86202Z
- Kit type: S2 38G Auto re-arm kit
- CO2 cylinder: 38 grams with 1/2 threads
- Intended use: Compatible Auto/Manual Pull inflatable PFD devices
Important: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced. Use only with specified PFD models. This gas cylinder is under pressure; misuse can be dangerous. Do not incinerate, expose to sun, or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
Warranty: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same. Choose the Leland Maximum Inflation Re-Arm Kit when your compatible inflatable PFD requires a properly matched replacement kit.
SEO META DESCRIPTION:
Leland Maximum Inflation Re-Arm Kit with 38-gram CO2 cylinder, yellow bobbin, and instructions for compatible Auto/Manual Pull inflatable PFDs.
Features:
- For re-arming compatible inflatable life vests and inflatable PFDs
- Designed for Auto/Manual Pull PFD devices
- Includes one 38-gram CO2 cylinder with 1/2 threads
- Includes yellow Bobbin/Water Sensing Element and step-by-step instructions
|
| Truck Freight: No |
| Oversized: No |
