Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit ZZ2 24G Auto 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with 1/2 threads, green pin, bobbin, and step-by-step re-arming instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices
- Includes one 24-gram CO2 cylinder with 1/2 threads, Green Indicator Pin, Yellow Bobbin/Water Sensing Element, and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Leland Maximum Inflation V85000-84204Z Re-Arm Kit ZZ2 24-Gram CO2 Cylinder, Auto/Manual 1/2-Inch Threads
Restore another season of use to compatible inflatable life jackets with the Leland Maximum Inflation V85000-84204Z Re-Arm Kit. Designed for inflatable life vests equipped with Auto/Manual Pull PFD devices, this kit includes the essential replacement components needed to re-arm a compatible personal flotation device after activation. Always compare the kit with your inflatable life jacket owner's manual and specified PFD model before installation, as using the wrong re-arming kit can be dangerous.
The kit includes one 24-gram CO2 cylinder with 1/2-inch threads, a green indicator pin, a yellow bobbin/water-sensing element, and step-by-step re-arming instructions. The CO2 cylinder is intended for one-time use; once punctured to inflate the vest, it must be replaced. The cylinder is UL Marine Classified and should be stored and handled according to the supplied safety instructions.
Key Features:
-
Inflatable PFD re-arm kit: Provides replacement components for compatible inflatable life vests after activation.
-
24-gram CO2 cylinder: Includes one pressurized cylinder with 1/2-inch threads for specified PFD models.
-
Auto/Manual Pull compatible: Intended for use with compatible Auto/Manual Pull PFD devices.
-
Complete replacement components: Includes a green indicator pin, yellow bobbin/water-sensing element, and re-arming instructions.
-
UL Marine Classified: Provides a clearly specified classification for the included marine-use cylinder.
Product Details:
-
Brand: Leland Maximum Inflation
-
Part number: V85000-84204Z
-
Product type: Inflatable life jacket re-arm kit
-
CO2 cylinder capacity: 24 grams
-
Thread type: 1/2-inch threads
-
Included components: One CO2 cylinder, green indicator pin, yellow bobbin/water-sensing element, and instructions
-
Use: Compatible specified PFD models with Auto/Manual Pull devices; verify fit with the owner's manual before use
-
Use limitation: One-time use after the CO2 cartridge is punctured
Safety and Storage: The gas cylinder is under pressure. Do not incinerate, expose it to the sun, or store it above 120°F (50°C). Do not throw it into an open fire or dump it at sea. Keep away from children. Dispose of gas cylinders only when empty, and discharge and dispose of corroded or rusty cylinders.
Warranty: Gas-filled cylinders are warranted against defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the cylinder.
Choose the Leland Maximum Inflation V85000-84204Z Re-Arm Kit to properly re-arm a compatible inflatable life jacket with the specified replacement cylinder and components.
California Proposition 65 Warning: [APPROVED PROP 65 WARNING REQUIRED]
SEO Meta Description: Re-arm compatible inflatable life jackets with the Leland V85000-84204Z kit, including a 24-gram CO2 cylinder, indicator pin, bobbin, and instructions.
|
| Truck Freight: No |
| Oversized: No |
