Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
Re-Arm Kit O2 25G Auto 1/2 Threads
Re-arming kits are essential as they add another season of use to your inflatable life jacket. This Leland kit contains one 24-gram CO2 cylinder with 1/2 threads, one Yellow Bobbin/Water Sensing Element, and step-by-step instructions. Make sure to check your inflatable life jackets owners manual and the re-arming kit ensuring they are a match. Using the wrong re-arming kit can be dangerous.
Features:
- For re-arming inflatable life vests
- Use with Auto/Manual Pull PFD devices with V95000 Series Inflator
- Includes one 24-gram CO2 cylinder with 1/2 threads, one Yellow Bobbin/Water Sensing Element and Instructions
- UL Marine Classified
CAUTION: This product can only be used one time. Once the CO2 cartridge is punctured to inflate the vest, it must be replaced.
WARNING: Use only with specified PFD Models. This gas cylinder is under pressure, therefore misuse can be dangerous. Do not incinerate, expose to sun or store above 120F (50C). Do not throw into open fire or dump at sea. Keep away from children. Dispose of gas cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
WARRANTY: Gas Filled Cylinders-We warranty all of our gas filled cylinders to and be free from defects and leakage for up to three years, depending upon storage conditions. Cylinders with a crimped closure, usually N20, O2 or Propane filled must not be stored below 40F as this may damage the seal. Custom made cylinders are not returnable. There is a 25% restocking fee for all other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with same.
Restore your compatible inflatable life jacket for another season on the water with the Leland Maximum Inflation V95000-84204Z Re-Arm Kit. Designed for Auto/Manual Pull PFD devices with a V95000 Series Inflator, this kit provides the essential replacement components needed after your inflatable PFD has been deployed. Always compare the kit with your life jacket owner’s manual and specified PFD model before installation, as using an incorrect re-arming kit can be dangerous.
The kit includes one 24-gram CO2 cylinder with 1/2-inch threads, one yellow bobbin/water sensing element, and step-by-step instructions. It is intended for re-arming compatible inflatable life vests and is UL Marine Classified. The CO2 cylinder is designed for one-time use; after the cartridge is punctured to inflate the vest, it must be replaced.
Follow the included instructions and your PFD manufacturer’s guidance when replacing the re-arm components. The gas cylinder is pressurized and must be handled and stored properly. Do not incinerate, expose it to sunlight, or store it above 120°F (50°C). Keep away from children, do not throw into an open fire or dump at sea, and dispose of cylinders only when empty. Discharge and dispose of corroded or rusty cylinders.
Warranty: Gas-filled cylinders are warranted to be free from defects and leakage for up to three years, depending on storage conditions. Cylinders with a crimped closure, usually N20, O2, or propane filled, must not be stored below 40°F, as this may damage the seal. Custom-made cylinders are not returnable. A 25% restocking fee applies to other returned cylinders. Credit for punctured cylinders is not permitted unless a faulty Leland valve is returned with the cylinder.
Keep the Leland Maximum Inflation V95000-84204Z Re-Arm Kit available for compatible inflatable PFD maintenance and follow your equipment manufacturer’s requirements before use.
Key Features
-
Compatible PFD use: Designed for Auto/Manual Pull PFD devices with a V95000 Series Inflator.
-
Complete re-arm components: Includes one 24-gram CO2 cylinder with 1/2-inch threads, one yellow bobbin/water sensing element, and instructions.
-
Inflatable life vest maintenance: Helps replace the components required to re-arm compatible inflatable life jackets after deployment.
-
Marine classification: UL Marine Classified.
-
Single-use cylinder: The CO2 cartridge must be replaced after it is punctured to inflate the vest.
Product Details
-
Brand: Leland Maximum Inflation
-
Part number: V95000-84204Z
-
Product type: Inflatable PFD re-arm kit
-
CO2 cylinder: One 24-gram cylinder with 1/2-inch threads
-
Water sensing element: One yellow bobbin
-
Instructions: Included
-
Intended use: Auto/Manual Pull PFD devices with a V95000 Series Inflator
California Proposition 65 Warning
[APPROVED PROP 65 WARNING REQUIRED]
|
| Truck Freight: No |
| Oversized: No |
