Lenco Marine 12" x 18" Edgemount Trim Tab Kit with LED Indicator Switch - 12V

Edge Mount

Mounts the actuator at the trailing edge of the plane, requiring 4 less transom height than standard mount

Trim tabs make the single most important difference in the way your boat rides and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco trim tabs make your boat ride smoother, drier, faster and with increased safety whether on a small skiff or a mega-yacht. Lenco's ballscrew design is more reliable, three times more powerful and features an instant response, which makes them very user friendly compared to typical hydraulics. We also like being oil-free and environmentally conscious.

• Instant response electric actuators for precise control
  
• Everything is fully submersible, maintenance-free and sealed for life
  
• Self-locking ballscrew will not drift, even while backing down
  
• 12-gauge laser cut stainless steel trim tab planes
  
• High-impact corrosion-proof mounts look great through years of abuse
  
• Clean, time and space-saving installation
  
• Actuators have high-impact, 50% glass fiber-filled, ultraviolet-resistant nylon case
  
• 316 super buff stainless steel rams

Tactile Switch w/ Indicator LED for all Single Actuator Trim Tab Systems
Features:

• Self-contained, sealed keypad
  
• Self-contained, sealed control box module
  
• Fade/smudge-proof, laser engraved graphics
  
• Plug & play switch wiring harness connector
  
• Includes 36" power pigtail for control box
  
• 2" hole cut-out size, overall size 2.75" x 2.75"
  
• Built-in retract feature returns tabs to a fully retracted position when power is removed
  
• 2 high-intensity L.E.D. indicator displays show the exact position of our trim tabs at all times
  
• Photo eye reads ambient light and adjusts the L.E.D. indicator display intensity for optimum viewing in direct sunlight
  
• 12 & 24-volt compatibility
  
• Includes Self-Check Feature

Each Kit Includes:

• Tactile LED Indicator Switch Kit
  
• 2 Actuators with 6' lead & Deutsch Plugs
  
• 2 20' Actuator Extension Wiring Harness
  
• 2 12 gauge Stainless steel trim tab planes
  
• 2 Upper Mounting Bracket with Gland Seal
  
• 2 Lower Mounting Bracket
  
• All stainless steel mounting hardware

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Enhance your boat’s performance and safety with the Lenco Marine 12" x 18" Edgemount Trim Tab Kit, designed for precise and reliable control. This innovative system mounts the actuator at the trailing edge of your vessel, requiring four inches less transom height than traditional mounts, making installation easier and more adaptable to a variety of boat designs. Trim tabs are essential for improving ride quality, stability, and speed, turning a good boat into a great one. Lenco’s electric actuators provide instant response and are fully sealed for maintenance-free operation, ensuring durability and reliability in harsh marine environments. The high-impact, corrosion-proof stainless steel mounts and laser-cut trim planes guarantee long-lasting performance and aesthetics, even after years of use. The self-locking ballscrew design prevents drift, maintaining the desired trim position without constant power, which enhances safety and convenience. The actuators feature a rugged, ultraviolet-resistant nylon case and 316 super buff stainless steel rams, making them suitable for both small skiffs and large yachts. The kit also includes a tactile LED indicator switch that is sealed and self-contained, with fade-proof graphics and a built-in retract feature that automatically returns the tabs to a fully retracted position when power is off. The switch’s high-intensity LED indicators provide real-time position feedback, and the ambient light sensor adjusts brightness for visibility in direct sunlight, ensuring clear operation at all times. Compatible with 12 and 24 volts, this system is easy to install with plug-and-play wiring harnesses, including a 36-inch power pigtail. Each kit contains two actuators, stainless steel trim planes, mounting brackets, hardware, and all necessary wiring, making setup straightforward and efficient. Whether upgrading an existing vessel or outfitting a new boat, the Lenco Edgemount Trim Tab Kit offers precision control, durability, and improved ride quality, contributing to a safer and more enjoyable boating experience.

Features:

• Mounts at the trailing edge of the boat, requiring 4 inches less transom height than standard mounts

• Instant response electric actuators for precise and quick control

• Fully sealed, maintenance-free operation with corrosion-proof components

• Self-locking ballscrew prevents drift, maintaining trim position without power

• Laser-cut stainless steel trim planes for durability and aesthetics

• High-impact, ultraviolet-resistant nylon actuator cases for long-term reliability

• 316 super buff stainless steel rams resist corrosion

• Tactile LED indicator switch with sealed, self-contained design

• High-intensity LED indicators display real-time trim tab position

• Ambient light sensor adjusts LED brightness for visibility in sunlight

• Compatible with 12V and 24V electrical systems

• Includes all mounting hardware, wiring harnesses, and control components for easy installation

Truck Freight: No
Oversized: No