Newmar Power PT-24-60W 24V 60A Smart Marine Battery Charger

PT-24-60W Battery Charger

Smart marine battery charging technology for 24V systems aboard workboats, military vessels, commercial vessels, and recreational craft. This charger interacts with batteries, providing the optimum three-stage charge process for fast recovery and conditioning, maximizing performance, and extending battery life.

A selector switch adjusts output voltage to adapt to gel-cell, flooded lead-acid, or AGM battery types. An optional temperature compensation sensor also adjusts output for ideal voltage based on changes in the batteries ambient temperature. All models are housed in a rugged stainless steel case with a durable white powder coat finish, and the internal circuitry is polyurethane coated for maximum corrosion resistance.

Features:

• 24V model
• Smart circuitry provides three-stage charging bulk, absorption, float
• Gel-cell/Flooded Lead-acid/AGM battery type switch selects optimum charge/float voltages
• Multiple isolated output banks; ammeter indicates total output current
• The optional sensor adjusts output voltage based on battery temperature
• Current limiting prevents damage from overloading
• Use as a power supply; can power loads without a battery in line
• Built to last rugged stainless steel case with a durable white powder coat finish with an optional drip shield and marinized internal circuitry
• Protection: Current Limiting, Thermal Protection, Forced Air Cooling, Drip Shield
• Install in conjunction with PT-MCU for additional control and monitoring
• ABS type approval for battery charging and power supplies

Specifications:

• Input VAC (50-60 Hz.): 207-253
• Input Amps @ Full Load: @ 115 VAC: NA, @ 230 VAC: 13
• Power Factor: .7
• Max Output Amps: 60
• Output Banks: 3
• Battery Capacity (Amp-Hours): 120-600
• Operating Temp. Rating Reference: T-4
• Case Size Reference: A-5
• Case Size (H x W x D): 17.5E x 12 x 7.2E inches (44.5E x 30.5 x 18.3E centimeters) *Note with Dripshield installed E add 2 (5.08 cm) to height and 1 (2.54 cm) to depth
• Weight Lbs./Kg: 24.1/11
• Optional Temp. Sensor Model: TP
• Remote Panel Model: N/A
• Compliance Reference: EN, CE, ABS

Temperature Rating References:

• Temperature: -20 degrees C to +50 degrees C
• Derate Linearly From Full output

Nominal Output Voltages at Gel/Flooded Switch Settings (without Temperature Compensation):

• Gel-Cell: 28.0 VDC Charge @ 50% load and 27.2 VDC Float @ .5 amp load
• Flooded/AGM: 28.4 VDC Charge @ 50% load and 26.8 VDC Float @ .5 amp load

Compliance References:

• UL: UL 1950 (per DNB report)
• CG: USCG CFR 183.410 (Ignition protected)
• EN: EN 60335-1
• CE: Carries the CE mark
• ABS: PT Series meets SVR 2009 4-8-3/5.9, Under 90 meters Rules 2006 4-6-4/7.19, and HSNC 2007 4-8-3/5.13.

Newmar Power PT-24-60W Battery Charger delivers smart, three-stage charging for 24V battery systems used aboard workboats, military vessels, commercial vessels, and recreational craft. With up to 60 amps of output, this marine battery charger supports battery recovery and conditioning while helping provide the appropriate charging profile for compatible battery types.

A selector switch allows the PT-24-60W to be configured for gel-cell, flooded lead-acid, or AGM batteries by selecting the corresponding charge and float voltages. The charger includes three isolated output banks, and an ammeter displays total output current. It can also operate as a power supply for loads without a battery in line, making it useful for marine electrical systems that require flexible power management. An optional TP temperature sensor adjusts output voltage based on battery temperature.

The rugged stainless steel case features a durable white powder coat finish, while polyurethane-coated internal circuitry helps resist corrosion in marine environments. Current limiting, thermal protection, forced-air cooling, and a drip shield provide additional protection features. The PT-24-60W is designed for installation with the PT-MCU for additional control and monitoring and carries EN, CE, and ABS compliance references, including ABS type approval for battery charging and power supplies.

Key Features:

• 24V, 60A charging: Supports 24V marine battery systems with a maximum output of 60 amps.
• Three-stage smart charging: Uses bulk, absorption, and float charging stages for battery recovery and conditioning.
• Selectable battery profiles: Switch between gel-cell, flooded lead-acid, and AGM charging settings.
• Three isolated output banks: Supports multiple battery banks while the ammeter indicates total output current.
• Marine-ready construction: Stainless steel housing, white powder coat finish, and polyurethane-coated internal circuitry support use in demanding marine environments.
• Protection and flexibility: Includes current limiting, thermal protection, forced-air cooling, a drip shield, and power-supply operation without a battery in line.

Product Details:

• Brand: Newmar Power
• Part number: PT-24-60W
• Input: 207–253 VAC, 50–60 Hz
• Input current at full load: 13 amps at 230 VAC
• Maximum output: 60 amps
• Output banks: 3 isolated banks
• Battery capacity: 120–600 amp-hours
• Case size: 17.5 × 12 × 7.2 inches, height × width × depth
• Weight: 24.1 pounds
• Operating temperature: -4°F to 122°F, with linear derating from full output
• Optional temperature sensor: TP
• Compliance references: EN, CE, ABS, UL 1950 per DNB report, and USCG CFR 183.410 ignition protection

Select the Newmar Power PT-24-60W for adaptable, high-capacity charging and power support in 24V marine electrical systems.

Important: This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Owner’s Manual: View the PT-24-60W Owner’s Manual