Raymarine EV-100 Tiller Evolution Autopilot with p70s Controller, Tiller Drive, and EV-1 Sensor Core T70153

EV-100 Tiller Evolution Autopilot

Features:

• A complete autopilot-in-a-box
• Evolution Ai for superior performance
• No calibration required
• Quick and easy installation
• Powerful tiller drive is compact and unobtrusive
• Used by the world's top single-handed sailors
• For tiller steered boats up to 13,200 lbs (6,000 kg)
• For 12V DC power systems
• Includes p70s Autopilot Controller

Includes:

• EV-1 Sensor Core
• p70s Autopilot Control Head
• ACU-100 Actuator Control Unit
• Tiller Drive
• Tiller Pin (sold in packages of 5)
• Mounting Socket (sold in packages of 5)
• Evolution Cabling Kit
• EV Unit O-Ring Pack (set of 2)
• Wall Mounting Bracket

The EV Sensor Core

At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-toinstall housing.

Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.

The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalk^ng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalk^ng and NMEA2000 networks.

Features:

• Precision monitoring of heading, pitch, roll, and yaw allowing the =autopilot to evolve instantly as sea conditions and vessel dynamics change
• Flexible installation options
• Mount above or below deck
• Simple SeaTalk^ng connectivity to the control head and ACU
• Solid state sensor technology delivers dynamic accuracy to within 2 degrees in all conditions
• Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays

p70 Autopilot Control Head

The p70 is a push-button operation controller designed primarily for sailboats.

Features:

• LightHouse user interface is simple and quick to use
• Wide 160 viewing angles
• Start up wizard helps you configure the pilot quickly and easily
• Anti-reflective coating for improved visibility in bright sunlight
• Low power - typically 132mA/1.6W - 27% less than ST70 at x4 measured brightness
• Supported autopilot modes: Auto; Standby; Pattern; Track; Wind Vane; Power Steer and Jog Steer
• Simple system and group dimming/illumination
• Support for multiple data sources
• SeaTalk^ng/NMEA2000 and SeaTalk1 connectivity (no bridging required)

ACU-100 Autopilot Control Unit (ACU)

The rugged ACU (Actuator Control Unit) delivers reliable autopilot drive power and also provides power to the SeaTalk^ng bus. Choose the ACU that fits your steering system type.

Evolution Cabling Kit

• 1 x SeaTalk^ng Power Cable (0.4m)
• 1 x SeaTalk^ng Backbone Cable (5m)
• 1 x SeaTalk^ng Spur Cable (0.4m)
• 1 x SeaTalk^ng 5-way Connector Block
• 2 x SeaTalk^ng T-piece Connector
• 2 x SeaTalk^ng Terminator

The Raymarine EV-100 Tiller Evolution Autopilot is a complete autopilot-in-a-box for tiller-steered sailboats up to 13,200 pounds. Designed for 12V DC power systems, this package combines the EV-1 Sensor Core, p70s Autopilot Control Head, ACU-100 Actuator Control Unit, and powerful yet compact tiller drive to provide a streamlined steering solution for cruising and single-handed sailing.

Evolution technology continuously monitors vessel motion across three dimensions, including heading, pitch, roll, and yaw, allowing the autopilot to respond as sea conditions and vessel dynamics change. The EV-1 Sensor Core requires no calibration, supports above- or below-deck installation, and uses SeaTalk^ng networking for a single-cable connection to the ACU and compatible control and network components. Its sealed enclosure is built to IPX6 and IPX7 waterproofing and submersion standards.

The p70s push-button autopilot controller features Raymarine’s LightHouse user interface, a wide 160-degree viewing angle, startup wizard, anti-reflective coating, and low-power operation. Supported modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer, and Jog Steer. The included Evolution Cabling Kit provides the essential SeaTalk^ng cables, connectors, T-pieces, and terminators for system installation. With its compact design and complete component package, the Raymarine EV-100 Tiller Evolution Autopilot is built for straightforward integration on compatible tiller-steered boats.

Key Features:

• Complete autopilot package: Includes the EV-1 Sensor Core, p70s control head, ACU-100, tiller drive, cabling, mounting hardware, and related accessories.
• Evolution sensing technology: Monitors heading, pitch, roll, and yaw for responsive autopilot operation as conditions change.
• No calibration required: Simplifies setup and helps get the system ready for use more quickly.
• Tiller boat compatibility: Designed for tiller-steered boats up to 13,200 pounds with 12V DC power systems.
• Flexible sensor installation: The EV-1 Sensor Core can be mounted above or below deck.
• Push-button control: The p70s controller offers multiple autopilot modes, sunlight visibility features, and SeaTalk^ng/NMEA2000 connectivity.

Product Details:

• Brand: Raymarine
• Model: EV-100 Tiller Evolution Autopilot
• Part Number: T70153
• Power system: 12V DC
• Intended use: Tiller-steered boats up to 13,200 pounds
• Included controller: p70s Autopilot Control Head
• Networking: SeaTalk^ng/NMEA2000 and SeaTalk1 connectivity
• Included cabling: SeaTalk^ng power, backbone, and spur cables; 5-way connector block; T-piece connectors; terminators

Choose the Raymarine EV-100 Tiller Evolution Autopilot for a complete, compact, and easy-to-install autopilot system tailored to compatible tiller-steered sailboats.

SEO Meta Description: Raymarine EV-100 Tiller Evolution Autopilot with p70s controller for 12V tiller-steered boats up to 13,200 pounds.