Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
50A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 50 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
- Switch mode technology for high efficiency, lightweight and quiet operation
- Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
- Can charge 2 banks of batteries simultaneously, no isolator necessary
- Can be used as a power supply or DC UPS when used in conjunction with a battery
- User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
- User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
- Half Power Mode reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
- Voltmeter and Ammeter for monitoring
- Fan cooled based on output current
- Protections: Short circuit, overload, reverse battery connection and over temperature
- Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
- Input: 120 VAC 60 Hz or 230 VAC 50 Hz
- Output: 12 VDC
- Amps: 50
- Remote Control: 900-RC
- Weight: 9.0 (lbs)
- Weight: 4.1 (kg)
- Dimensions: 13.03 x 9.60 x 3.82 (in)
- Dimensions: 331 x 244 x 97 (mm)
- Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
- Warranty: 2 Year Limited
Applications:
- Automotive
- Recreational vehicles
- Marine
- Communications sites
- Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Samlex America SEC-1250UL 50A battery charger provides fully automatic charging for up to two separate 12V lead-acid battery banks. Designed for automotive, recreational vehicle, marine, communications, and battery backup applications, this two-bank charger supports Flooded, Absorbed Glass Mat (AGM), and Gel Cell batteries from either a 120 VAC, 60 Hz or 230 VAC, 50 Hz source. Its selectable charging modes and integrated monitoring help deliver practical, reliable power management for stand-alone battery systems and loaded DC applications.
Switch-mode technology provides efficient, lightweight, and quiet operation, while the selectable two-stage or three-stage charging algorithm supports rapid and controlled charging. A DIP switch allows the SEC-1250UL to be configured for batteries connected to a DC load, including DC UPS applications. The charger can also function as a DC power supply when appropriate for the installation. Half Power Mode reduces maximum charging current to half the rated capacity for charging lower-capacity batteries, and the included temperature sensor helps prevent undercharging or overcharging when battery temperature varies extensively.
Key Features:
- 50A output charges up to two 12V lead-acid battery banks simultaneously without an isolator.
- Selectable two-stage or three-stage charging supports stand-alone batteries and batteries connected to a DC load.
- Compatible with Flooded, AGM, and Gel Cell lead-acid batteries.
- User-configurable 120 VAC or 230 VAC input with 50 Hz or 60 Hz operation.
- Voltmeter and ammeter provide convenient charging and power monitoring.
- Short-circuit, overload, reverse battery connection, and over-temperature protection support dependable operation.
Product Details:
- Brand: Samlex America
- Part number: SEC-1250UL
- Input: 120 VAC, 60 Hz or 230 VAC, 50 Hz
- Output: 12 VDC, 50A
- Weight: 9.0 lb
- Remote control: 900-RC
- Safety: Listed to UL Standard UL-1564; EMI compliant with FCC Part 15(B), Class B
- Warranty: 2-year limited
- Includes: Temperature sensor and lugs
California Proposition 65 Warning: WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Choose the Samlex America SEC-1250UL for flexible, monitored, and configurable 12V battery charging across demanding power system applications.
SEO Meta Description: Samlex America SEC-1250UL 50A 12V battery charger supports two banks, selectable charging stages, AGM, Gel, and Flooded batteries, plus temp sensing.
Features:
- 50A output charges up to two separate 12V lead-acid battery banks simultaneously without an isolator.
- Selectable two-stage or three-stage charging supports stand-alone batteries and batteries connected to a DC load.
- Compatible with Flooded, AGM, and Gel Cell lead-acid batteries.
- Configurable 120 VAC or 230 VAC input with 50 Hz or 60 Hz operation.
- Voltmeter and ammeter provide convenient charging and power monitoring.
- Includes temperature sensor and protection against short circuits, overloads, reverse battery connection, and over-temperature conditions.
|
| Truck Freight: No |
| Oversized: No |
| Owners Manual Url: https://productimageserver.com/literature/ownersManual/67189OM.pdf |
