Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
80A Battery Charger - 12V - 2-Bank - 3-Stage w/Dip Switch Lugs - Includes Temp Sensor
This advanced fully automatic three-stage 80 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 2 separate battery banks.
Features:
- Switch mode technology for high efficiency, lightweight and quiet operation
- Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
- Can charge 2 banks of batteries simultaneously, no isolator necessary
- Can be used as a power supply or DC UPS when used in conjunction with a battery
- User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
- User Selectable ( by DIP Switch) for 2 or 3 stage, rapid and safe charging of standalone and loaded Lead Acid Batteries
- Half Power Mode reduces maximum charging current to half the rated capacity, allows for safe charging of lower capacity batteries
- Voltmeter and Ammeter for monitoring
- Fan cooled based on output current
- Protections: Short circuit, overload, reverse battery connection and over temperature
- Includes temperature sensor to prevent under/overcharging of battery if temperature varies extensively
Specifications:
- Input: 120 VAC 60 Hz or 230 VAC 50 Hz
- Output: 12 VDC
- Amps: 80
- Remote Control: 900-RC
- Weight: 9 (lbs)
- Weight: 4.1 (kg)
- Dimensions: 15 x 9.61 x 3.82 (in)
- Dimensions: 381 x 244 x 97 (mm)
- Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B
- Warranty: 2 Year Limited
Applications:
- Automotive
- Recreational vehicles
- Marine
- Communications sites
- Battery back-up systems
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Samlex America SEC-1280UL 80A 12V battery charger is a fully automatic charging solution for automotive, recreational vehicle, marine, communications, and battery backup applications. Designed for 12-volt lead-acid batteries, this two-bank charger can charge up to two separate battery banks simultaneously while also functioning as a DC power supply or DC UPS when used with a battery.
Switch-mode technology supports efficient, lightweight, and quiet operation, while selectable charging settings let you configure the unit for two-stage or three-stage charging. The three-stage setting supports rapid and controlled charging for standalone batteries, while the two-stage algorithm is suitable for batteries connected to a DC load. A half-power mode reduces the maximum charging current to half the rated capacity, helping accommodate lower-capacity batteries. User-configurable AC input supports either 120 VAC at 60 Hz or 230 VAC at 50 Hz.
The SEC-1280UL includes a voltmeter and ammeter for convenient monitoring, along with fan cooling based on output current. Built-in protection helps guard against short circuits, overload, reverse battery connection, and over-temperature conditions. The included temperature sensor helps manage charging when battery temperature varies extensively. The charger is listed to UL Standard UL-1564 and is EMI compliant with FCC Part 15(B), Class B.
Key Features:
-
80-amp, 12V DC output: Provides high-capacity charging for compatible 12-volt lead-acid battery systems.
-
Two-bank charging: Charges up to two separate battery banks simultaneously without requiring an isolator.
-
Selectable charging algorithms: DIP switch settings provide two-stage or three-stage charging for standalone batteries and batteries connected to a DC load.
-
Versatile operation: Functions as a battery charger, DC power supply, or DC UPS when used with a battery.
-
Monitoring and protection: Includes a voltmeter, ammeter, temperature sensor, fan cooling, and multiple protective functions.
Product Details:
-
Brand: Samlex America
-
Part number: SEC-1280UL
-
Input: 120 VAC, 60 Hz or 230 VAC, 50 Hz
-
Output: 12 VDC
-
Battery compatibility: Flooded, AGM, and Gel Cell lead-acid batteries
-
Remote control: 900-RC
-
Weight: 9 pounds
-
Warranty: 2-year limited
California Proposition 65 Warning: WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
Choose the Samlex America SEC-1280UL for flexible, monitored, and protected charging across demanding 12-volt battery system applications.
SEO Meta Description: Samlex America SEC-1280UL 80A 12V battery charger supports two banks, selectable 2- or 3-stage charging, temperature sensing, and DC UPS use.
Features:
- 80-amp, 12V DC output for compatible 12-volt lead-acid battery systems
- Charges up to two separate battery banks simultaneously without an isolator
- DIP switch selection for two-stage or three-stage charging
- Operates as a battery charger, DC power supply, or DC UPS with a battery
- Includes voltmeter, ammeter, temperature sensor, and fan cooling
- Protection against short circuit, overload, reverse battery connection, and over-temperature conditions
|
| Truck Freight: No |
| Oversized: No |
| Owners Manual Url: https://productimageserver.com/literature/ownersManual/67190OM.pdf |
