Installment options at checkout are provided by Shop Pay and its partners and are subject to eligibility. Options depend on your purchase amount and may require a credit check by the financing partner. Terms, rates, and eligibility are determined by the financing partner. For details, see the Shop Pay Installments terms during checkout.
52mm (2-1/16") ViewLine Flex Gauge
The VL Flex device can easily replicate every analog instrument thanks to the sun-readable 1.44 TFT display embedded into a standard 52 mm satellite instrument. The supported analog inputs allow you to directly read from your engine sensors, and the CAN interface expands this possibility by allowing the device to read from the digital network.
The simple but effective graphic design can be set up in a single or dual layout, presenting the data in a clear and intuitive form. The colored bar graph and the alarm display allow you to visually understand your data.
The VL Flex configurator is the easiest way to configure your VL Flex device! Thanks to the contactless configuration you can set up your all-in-one instrument with a simple tap! LaunchVL FlexApp and define your settings through the user-friendly interface, then simply hold your mobile device in proximity of the device to transfer the configuration. Thanks to the embedded passive antenna the configuration can be done powerless!
*VL Flex Configurator App has to be downloaded (Android or iOS)
Supported Configurations:
- Engine Speed - Boat Speed - Ammeter - Voltmeter - Battery SOC - Battery SOH - Rudder Angle
- Battery Temperature - Battery Autonomy - Engine Hours - Speed Over Ground - Boost Pressure
- Depth - Clock - Fuel Level - Fresh Water Level - Waste Water Level - Trim Position
- Coolant Temperature - Oil Pressure - Oil Temperature - Gear Oil Pressure - Gear Oil Temperature
Features:
- 1.44 TFT display
- NMEA2000 interface
- Integrated warning alarm
- 52 mm installation diameter
In the Box:
- VL Flex 52 gauge
- Wire harness
- Mounting Spinlock
- Safety Instructions
*Sold as an Individual
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Veratron ViewLine Flex 52mm Digital Marine Gauge brings versatile engine and boat monitoring to a standard 52mm (2-1/16-inch) instrument installation. Designed for marine dashboards, this configurable gauge combines a sun-readable 1.44-inch TFT display with analog sensor inputs and an NMEA 2000 interface, allowing it to display data from engine sensors and a digital network.
The clear graphic interface can be configured in single or dual layouts to present information in an intuitive format. A colored bar graph helps visualize readings, while the integrated warning alarm provides an at-a-glance alert when configured monitoring data requires attention. Supported data includes engine speed, boat speed, ammeter, voltmeter, battery state of charge, battery state of health, rudder angle, temperatures, pressures, fluid levels, trim position, depth, clock, engine hours, speed over ground, boost pressure, and battery autonomy.
Configuration is handled through the VL Flex Configurator App for Android or iOS. Using contactless configuration, you can define settings through the app and transfer them by holding your mobile device near the gauge. The embedded passive antenna allows configuration without powering the instrument. The Veratron ViewLine Flex gauge is sold individually and includes the gauge, wire harness, mounting Spinlock, and safety instructions.
Note: The VL Flex Configurator App must be downloaded separately. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Key Features
-
1.44-inch TFT display: Provides a sun-readable screen for viewing configured marine and engine data.
-
Analog and NMEA 2000 inputs: Supports direct engine sensor readings and data from an NMEA 2000 digital network.
-
Configurable display layouts: Choose a single or dual layout with a colored bar graph for clear data presentation.
-
Integrated warning alarm: Helps provide visual awareness of configured alarm conditions.
-
Contactless app configuration: Set up the gauge through the VL Flex Configurator App using a compatible Android or iOS mobile device.
Product Details
-
Brand: Veratron
-
Part number: B00043501
-
Product type: ViewLine Flex marine gauge
-
Installation diameter: 52mm (2-1/16 inches)
-
Display: 1.44-inch TFT
-
Interface: NMEA 2000
-
Configuration: VL Flex Configurator App for Android or iOS
-
Quantity: Sold individually
-
Included: VL Flex 52 gauge, wire harness, mounting Spinlock, and safety instructions
Choose the Veratron ViewLine Flex gauge for configurable, easy-to-read marine instrument monitoring in a standard 52mm dashboard installation.
SEO Meta Description: Veratron ViewLine Flex 52mm marine gauge with 1.44-inch TFT display, analog inputs, NMEA 2000 interface, alarms, and app configuration.
|
| Truck Freight: No |
| Oversized: No |
| Owners Manual Url: https://productimageserver.com/literature/ownersManual/87544OM.pdf |
