Xantrex Freedom XC PRO Marine 2000W 12V True Sine Wave Inverter/Charger

Freedom XC PRO Marine 2000W Inverter/Charger - 12V

A true sine wave inverter with a built-in lithium-ion battery charger and transfer switch in a compact, lightweight footprint. Configure and monitor system performance via Bluetooth app available on the optional Bluetooth remote panel (# 808-0817-02). Seamless integration with Micro-C NMEA 2000 Connector.

The Freedom XC PRO Marine inverter/charger, supporting CANbus NMEA 2000 protocol, is the most versatile and flexible AC power solution in the market today. It supports seamless integration with third-party monitoring and control systems. It also features a 100 amp (2000W model) / 150 amp (3000W model) battery charger and offers all of the configurable features of the Freedom XC series inverter/charger in a compact, lightweight package. It cranks out full output in invert or charge mode from -4F (-20C) - 104F (40C) for operation in all climate temperatures. The extended surge rating enables compressor loads such as an A/C or a fridge to start reliably.

Features:

• Extended Surge Rating: Surges to 2X continuous power for 5 seconds for motor loads
• True Sine Wave AC Power:For the operation of sensitive and motor loads
• Ignition Control:Feature to turn the inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off
• Wide 10-18 VDC Input Range:Ensures inverter operation on high voltage alternators found on many new vehicle chassis
• Programmable AC Under-Voltage (85-110VAC) Shutdown:Feature ideal to operate under weak shore power or generator input
• Built-in 50A AC Transfer Relay (3KW model): Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power

Built-In Charger Features:

• Power Factor Corrected Multi-Stage Charging: Utilizes less shorepower when charging batteries. This frees up more usable AC power for running electrical devices and appliances and reduces the likelihood of tripping shorepower breakers
• Programmable:Configurable 3 stage temperature compensated battery charge algorithm for optimal charging of almost any battery type up to 18V
• Battery Equalization:Maximizes flooded battery life
• Dead Battery Charging Down to 0 Vdc
• Power Share:Prioritizes AC loads by reducing the charge current and maintaining the total input current to less than the breaker setting
• Easily configurable settings to charge any lithium-ion battery

The Xantrex Freedom XC PRO Marine 2000W 12V Inverter/Charger provides a versatile AC power solution for marine and mobile power systems. It combines a true sine wave inverter, lithium-ion battery charger, and transfer switch in a compact, lightweight design. Extended surge capability helps support motor-driven loads such as air conditioners and refrigerators during startup.

Designed for flexible system integration, the Freedom XC PRO Marine supports CANbus NMEA 2000 protocol and integrates with third-party monitoring and control systems. System performance can be configured and monitored through the Bluetooth app when used with the optional Bluetooth remote panel (# 808-0817-02). Its wide 10–18 VDC input range supports operation with high-voltage alternators found on many newer vehicle chassis, while ignition control can switch the inverter on or off through a 12 VDC signal to help minimize battery drain.

Key Features

• True sine wave AC power for sensitive electronics and motor loads
• Extended surge rating delivers up to 2X continuous power for 5 seconds for motor loads
• Built-in lithium-ion battery charger with programmable, three-stage, temperature-compensated charging
• Power factor-corrected multi-stage charging helps make more AC power available for connected devices and appliances
• Programmable AC under-voltage shutdown from 85–110 VAC for weak shore power or generator input
• Supports CANbus NMEA 2000 and third-party monitoring and control system integration

Product Details

• Brand: Xantrex
• Model: Freedom XC PRO Marine
• Part number: 818-2015
• Output: 2000 watts
• System voltage: 12 volts
• Input range: 10–18 VDC
• Operating temperature range: -4°F to 104°F
• Battery charging features include equalization, power sharing, and dead-battery charging down to 0 VDC

Choose the Xantrex Freedom XC PRO Marine for configurable inverter and charging performance in a compact 12V power solution.

Important: This product may not be returned to the original point of purchase. Contact the manufacturer directly with any issues or concerns.

Product summary: Xantrex Freedom XC PRO Marine 2000W 12V inverter/charger with true sine wave power, lithium-ion charging, surge support, and NMEA 2000 integration.